Gap bed lathe machine Top0632A

Gap bed lathe machine Top0632A

Add to Wishlist
Add to Wishlist

Features:

Precision ground hardened bedways
Thespindle is supported wish precision roller bearings
Headstockgears are made of high quality steel, ground and hardened
Removablegap is provided for larger diameter work
Easyoperation speed change levers
Spindlespeed range 70～2000r/min
Twodifferent length beds are available
Easyoperating gear box has various feeds and thread cutting function
D1-4camlock spindle nose

Order on WhatsApp
Category:

Description

MODELS C0632A×750 C0632A×1000 C0636A×750 C0636A×1000
Swing over bed 330mm(13″) 360mm(14″) 358mm(14″)
Swing over cross slide 198mm(7-25/32″) 224mm(8-13/16″) 223mm(8-25/32″)
Swing in gap diameter 476mm(18-3/4″) 502mm(19-3/4″) 502mm(19-3/4″)
Swing in length 210mm(8-1/4″) 210mm(8-1/4″) 210mm(8-1/4″)
Center height 166mm(6-1/2″) 179mm(7″) 179mm(7″)
Admits between 750mm(30″) 1000mm(40″) 750mm(30″) 1000mm(40″)
Bed width 187mm(7-3/8″) 187mm(7-3/8″) 187mm(7-3/8″)
Bed length 1405mm(55-5/16″) 1655mm(65-1/8″) 1405mm(55-5/16″) 1655mm(65-1/8″)
Bed height 290mm（11- 13/32″） 290mm（11- 13/32″） 290mm（11- 13/32″）
Spindle bore 38mm(1-1/2″) 38mm(1-1/2″) 38mm(1-1/2″)
Spindle nose D1-4″ D1-4″ D1-4″
Taper in nose MT NO.5 MT NO.5 MT NO.5
Taper in sleeve MT NO.3 MT NO.3 MT NO.3
Speeds number 8 8 8
Range of spindle speed 70-2000 r/min 70-2000 r/min 20～450 or 135～3000r.p.m
Cross slide width 130mm（5-3/32″） 130mm（5-3/32″） 130mm（5-3/32″）
Cross slide travel 170mm(6-11/16″) 170mm(6-11/16″) 160mm（6-5/16″）
Compound rest width 80mm(3-1/8″) 80mm(3-1/8″) 80mm(3-1/8″)
Compound rest travel 95mm(3-9/16″) 95mm(3-9/16″) 95mm(3-9/16″)
Lead screw diameter 22mm(7/8″) 22mm(7/8″) 22mm(7/8″)
Lead screw thread 8T.P.I. or 3mm 8T.P.I. or 3mm 8T.P.I. or 3mm
Feed rod diameter 19mm(3/4″) 19mm(3/4″) 19mm(3/4″)
Cutting tool max section 16mm×16mm(5/8″×5/8″) 16mm×16mm(5/8″×5/8″) 16mm×16mm(5/8″×5/8″)
Threads imperial pitches 34 Nos.4-56 T.P.I 34 Nos.4-56 T.P.I 34 Nos.4-56 T.P.I
Threads metric pitches 26 Nos.0.4-7 M.P 26 Nos.0.4-7 M.P 26 Nos.0.4-7 M.P
Longitudinal feeds imperial 32 Nos.0.002-0.548″/Rev 32 Nos.0.002-0.548″/Rev 32 Nos.0.002-0.548″/Rev
Longitudinal feeds metric  32 Nos.0.052-0.392mm/Rev 32 Nos.0.052-0.392mm/Rev 32 Nos.0.052-0.392mm/Rev
Cross feeds imperial 32 Nos.0.007-0.0187″/Rev) 32 Nos.0.007-0.0187″/Rev 32 Nos.0.007-0.0187″/Rev
Cross feeds metric 32 Nos.0.014-0.380mm/Rev 32 Nos.0.014-0.380mm/Rev 32 Nos.0.014-0.380mm/Rev
Quill diameter 32mm(1-1/4″) 32mm(1-1/4″) 32mm(1-1/4″)
Quill travel 100mm(3-15/16″) 100mm(3-15/16″) 100mm(3-15/16″)
Quill taper MT NO.3 MT NO.3 MT NO.3
For main motor 2HP, 3PH or 2PH, 1PH 2HP, 3PH or 2PH, 1PH 2HP, 3PH or 2PH, 1PH