0
0 items
KSh0.00
No products in the cart.
shaping machine BC6085,BC60100
Available on backorder
Main features:
1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined
plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system.
3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting,
the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed,
starting and stopping the machine
Add to Wishlist
Add to Wishlist
Hand-held power threader PT30-2B
Available on backorder
Main features:
1. Hand-held, powerful, portablepower drive.
2. Equipping one direction 110V or220V universal motor
3. Designed to work with 11R diehead
4. Ideal for on-site applications such as gas line pipe installation
5. Mechanical transmission based on gears set
6. CE & CSA approved
Add to Wishlist
Add to Wishlist
Diamond core drill CD-130-350
Available on backorder
Main features:
1. Universal drive machine for dry& wet drilling
2. Versatile and efficient,drilling in steel-reinforced concrete, masonry and other materials
3. For pipeline and cable ducting,ventilation channels, test core drilling
4. All high diamond drill bits are laser welded for superior strength 3 times stronger than conventional brased bits
5. Heavy-duty, multi-purpose bits for drilling in many types of materials including reinforced concrete, cinderblock, stone, tec.
Add to Wishlist
Add to Wishlist
Roll groover YG12A,YG12C
Available on backorder
Main featuers:
1. The YG12A hydraulic rollgroover features a power 10 ton hydraulic ram in a compact, easy to transportunit.
2. The YG12C hydraulic rollgroover is capable of grooving up to 40 standard wall pipes.
3. With one man set-up andoperation, the YG12A is the idealgroover for job-site requirements.
4. YG-12A mounts quickly to TC50Dpower drive.
5. Roll set change out isaccomplished in seconds.
6. ALL IN ON design of drive shaftfor convenient replacement changing.
Add to Wishlist
Add to Wishlist
Pipe threading machine R2,R4,R6
Available on backorder
Features
1. Machine maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive.
2. A large chip tray and oil reservoir makes machine ideal for longer uninterrupted threading.
3. Features a high clearance carriage making the threading operation easier and a generous top cover area that is ideal for keeping tools and work related materials handy.
4. Machine is equipped with a powerful 750W INDUCTION MOTOR which enable the machine process standard threads more quickly .
5. GEAR BOX DRIVING.
6. Compact design with cast aluminum body. Easy and fast transport and set-up.
7. Universal applicable, can also work on workbench.
8. CE APPROVED.
9. POWDER COATING, instead of traditional painting, healthy, environmental friendly.
10. Automatic DIE HEAD, 2 heads equipped.
11. Standard die is 9CrSi, HSS or 9Cr2 optional.
12. Constant oil flow, through the die head, with an integral oil reservoir.
13. Threader Stands and FOOT SWITCH are optional (extra charge).
Add to Wishlist
Add to Wishlist
Pipe threading machine TC50D,TC100F
Available on backorder
Main features:
1. Compact design for easytransportation
2. Versatile design, can be usedas a power drive for many jobs, such as pipe grooving
3. All size of threads getprocessed only in one turn
4. Reliable and proven forconstant professional use
5. Ideal for stationary threadingin workshop, on building sites, for production, repair and service.
6. 3 shifts of speed, enables themachine always working within optimized load
7. Induction motor together withgear box + belt, effecientily control the noise level
Add to Wishlist
Add to Wishlist
BY60100C,BY60125C
Available on backorder
Main Features
1. The machine is suitable for various cutting plane, formed surface and is suitable for single piece and small batch production.
2.The main cutting movement and feeding movement are driven by hydraulic transmission, with stepless speed adjustment.
3.This machine has hydraulic overload insurance device, with thesmooth transmission, small excess of stroke, reliable and flexible
starting andstopping.
4. This machine has a high rigidity, strong cutting force andhigh reversing precision, low oil temperature, small thermal deformation.
5. This machine has a stable accuracy and can adapt to thestrong cutting and continuous work.
6. The machine table can realize the fast moving in vertical andhorizontal directions, and the tool post has the automatic tool-reliefmechanism.
The handles of the machine is centralized, so it is convenient for operation.
Add to Wishlist
Add to Wishlist
Main features
Shaper is mainly used forplanning the plane on the small and medium-size workpieces in small batchproduction of a single piece,
forming the surface and grooves .Its fivecharacteristics:
1. Planner bench can turingangle of the table with horizontal and lift moving mechanism; for planning theinclined plane,
thereby expanding the scope of use.
2. Planner feed system uses acam mechanism to adjust the feed rate. It is very convenient to change thefeeding rate.
3. Planer equipped with cuttingsystem overload safety angencies. Once occur careless operation, externalinfluences or cutting overload,
it will shift to self-skid, and non-sestructivethe machine.
4. Gap between the ran and thebed rail, the speed gear and the main sliding guide surface, will be lubricatedby the pump shot oil.
5. Planner is equipped with aclutch and parking brake device. So do not need to cut off the power whenchanging the speed,
stard the machine or braking the machine.
Add to Wishlist
Add to Wishlist
BC6050,BC6063,BC6066
Available on backorder
Main Features:
1. The tool post can rotate with more angle inthe vertical plane,
2. Manual feeding is available. For tool post.
3. For slotting shaping more economic machiningequipment.
4. worktable feeding on cross and vertical specially for swallow tail machining and channel machining.
5. suitable for single piece or small match production.
Add to Wishlist
Add to Wishlist
Vertical Machine Center USK420
Available on backorder
Features:
1.The base, slide,table, column, headstock and other major parts are made of HT250 cast iron base.
2.Linear guide way are from Taiwan HIWIN.
3.Z axis balance with weights to ensure smooth movement of the headstock,stable.
4.The spindle unit maximum speed up to 10000rpm.
5.X,Y,Z axis screw protection devices to ensure clean screw and guide.
6.Full protection cover, more safe and reliable.
7.Reliable centralizedlubrication system.
8.Using10 tools funnel type tool changer from Taiwan, time is short, high efficiency.
9.Using the oil-waterseparation device can be collected most of the lubricating oil is separatedfrom the coolant.
Add to Wishlist
Add to Wishlist
Vertical Machine Center VMC850
Available on backorder
Features:
1.Bed body, worktable, slide, column, headstock, etc are made up by high rigidity cast iron material
2.X/Y/Z-axis adopts Taiwan HIWIN linear guide ways( width 45mm )
3.X/Y/Z-axis servo motor connects Taiwan HIWIN high precision ball screws through one elastic coupling respectively
4.Z-axis servo motor is with automatic self-braking function
5.Taiwan POSA brand spindle unit with8000rpm,the max. spindle speed can be achieved to 6000rpm. NSK bearing forspindle with P4 grade
6.Taiwan brand umbrella type toolmagazine
7.Equippedwith large flow cooling pump and large capacity water tank, fully ensure thecooling, the power of the cooling pump is 120W 、20L/min, high pressure punching andprovide the full cooling.
8.There is also cooling jet at the top surface of spindle box, which can be either water cooling or air cooling, and can be changed easily
9.Pneumatic triple can filter impurities and moisture in the gas source, to prevent the damage and corrosion of the machine parts by the impure gas. Electromagnetic valve group by PLC program control, ensure that the spindle loose tools, spindle center blowing, spindle folder tools, air cooling spindle etc. actions can be completed quickly and accurately.
10.centralized automatic lubrication,
Add to Wishlist
Add to Wishlist
Vertical Machine Center XH7132A
Available on backorder
Main features:
1. X/Y/Z-axis adopts Taiwan HIWINlinear guide ways( width 45mm )
2. X/Y/Z-axis servo motor connectsTaiwan HIWIN high precision ball screws Taiwan brand drum-type tool magazine
3. Bed body, worktable, slide,column, headstock, etc are made up by high rigidity cast iron material,
4. Taiwan Posa brand spindle unitwith 8000rpm,the max.spindle speed can be achieved to 6000rpm.with highprecision,high rigidty.NSK bearing
5. Taiwan brand CHENSOUND umbrellatype tool magazine
6. Equipped with large flowcooling pump and large capacity water tank
7. Electromagnetic valve group byPLC program control, ensure that the spindle loose tools, spindle centerblowing, spindle folder tools, air cooling spindle etc
8. The guideway and ballscrew pairadopt centralized automatic lubrication, Each node is equipped with aquantitative oil separator.
Add to Wishlist
Add to Wishlist
Vertical machine center XH7125
Available on backorder
Main features：
1. mini cnc milling economic machine center XH7125 is with box guideways, ensuring the machines machining accuracy and stability.
2.The small vmc machine can be with taiwan arm type tool magazine or drum type tool magazine with 10 tools capacity.
It can change tools quickly.
3.The machine is with RS232 interface, separated handwheel, spindle blowing chip removal system.
Add to Wishlist
Add to Wishlist
Vertical Machine Center XH7126
Available on backorder
Main features：
1. mini cnc milling economic machine center is with linear guideways, ensuring the machine's machining accuracy and stability.
2.The small vmc machine can be with taiwan arm type tool magazine 12 tools capacity, It can change tools quickly.
3.spindle taper BT40
4. 3.7kw servo motor
Add to Wishlist
Add to Wishlist
Vertical Machine Center VMC1580
Available on backorder
Add to Wishlist
Add to Wishlist
Vertical Machine Center VMC1260
Available on backorder
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
