0
0 items
KSh0.00
No products in the cart.
K11,K11A 3-jaw Self-centering chuck
Available on backorder
Main features:
1. K11 series Three-jawSelf-centring chuck is subdivided into three types,K11,K11A.
2. Type K11 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K11A provides,ISO3442standard clutches.
4. Soft clutches are to beprovided on request,higher centring accuracy can be achieved after being rubbedon the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K12,K12A 4-jaw Self-centering chuck
Available on backorder
Main features:
1. K12 series Three-jawSelf-centring chuck is subdivided into three types,K12,K12A.
2. Type K12 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K12A provides,ISO3442standard clutches.
4. Soft clutches are to be provided on request,higher centring accuracy can be achieved after being rubbed on the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K12,K12A 4-jaw Self-centering chuck
Available on backorder
Main features:
1. K12 series Three-jawSelf-centring chuck is subdivided into three types,K12,K12A.
2. Type K12 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K12A provides,ISO3442standard clutches.
4. Soft clutches are to beprovided on request,higher centring accuracy can be achieved after being rubbedon the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K72 series 4-jaw Independent chuck
Available on backorder
Main features：
1.Material:HT300
2.Size:80-2000mm
3.Independentchuck with manual gripping
4. Certaindiscount is given on large quantities
Add to Wishlist
Add to Wishlist
GK11 series steel body 3-jaw self-centering chuck
Available on backorder
Main features:
1. STEEL BODY：DIN6350, DIN55026, DIN55027, DIN55029
2. Top accuracy & qualityforged steel, high speed
3. Precision lathe chucks have topaccuracy and the gurantee to maintain this accuracy for an extended period oftime
4. These chucks have a modern andcompact design
5. They can be used wherever highprecision machining is demanded
Add to Wishlist
Add to Wishlist
GK12 series steel body 3-jaw self-centering chuck
Available on backorder
Main features:
1. STEEL BODY：DIN6350, DIN55026, DIN55027, DIN55029
2. Top accuracy & qualityforged steel, high speed
3. Precision lathe chucks have topaccuracy and the gurantee to maintain this accuracy for an extended period oftime
4. These chucks have a modern andcompact design
5. They can be used wherever highprecision machining is demanded
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Available on backorder
Main features:
1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined
plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system.
3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting,
the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed,
starting and stopping the machine
Add to Wishlist
Add to Wishlist
Double column horizontal CNC band saw
1 in stock
Main features:
1. Extremely rigid dual column cast iron construction
2. PLC control for a fully automatic sawing process
3. Easy to use touch screen monitor for easy and quick recording of saw parameters
4. Hydraulic tool clamping included with standard equipment
5. The feed units linear measuring system ensures long term maximum accuracy
6. Feed of the torsion-proof sawframe is infinitely variable via a hydraulic throttle valve
7. Extra rigid, adjustable sawblade guide
8. Hydraulic workpiece clamping with clamping pressure control and bundle vise are included in the standard equipment
Add to Wishlist
Add to Wishlist
CNC Band saw GK260,GK320,GK400,GK500
1 in stock
Main features:
1. Full Automatic NC Sawapplicable to mass production and continuous cutting.
2. Touch screen type controlpanel, sawing parameters digital setting, presetting 5 groups of sawing data
3. PLC controller, completeautomatic sawing process
4. Double column structurevertical lifting high stability
5. Hydraulic pressure control thespeed of sawing stepless speed regulation
6. DRO control feeding length,high accuracy
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Available on backorder
Main features:
1. Induction hardened, precision ground V-way bed.
2. D1-4 spindleis supported by high quality tapered roller bearing.
3. Hardened,precision ground gears in headstock.
4. High precision directly mounting chuck.
5. Carriage mounted spindle control lever.
6. Automatic feed and threading are fully interlocked.
7. Tailstock maybe offset for turning tapers.
8. One-piece casting iron base allows heavy cuts.
9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Available on backorder
Main features:
1.2 Axis digital readout system
2.Quick change toolpost with 5 holders
3.Concertina leadscrew cover
4.Gear drive headstock for quick change of spindle speeds
5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting
6.Foot operated spindle brake with safety cut out switch
7.Change gears for metric and imperial thread cutting
8.Adjustable taper roller bearings support the spindle
9.Inching button is incorporated on the control panel for convenient spindle speed selection
10.Enclosed quick action gearbox for thread cutting and auto feeding
11.Powered longitudinal and cross feeds
12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Available on backorder
Main features:
1. Gear drive headstock for quick change of spindle speeds
2. Cast iron stand increasing rigidity and reducing vibration
3. Precision V-beds are hardened and ground, incorporating a rigid webbed casting
4. Low voltage work light
5. Foot operated spindle brake with safety cut out switch
6. Slide out front swarf tray for easy cleaning
7. Change gears for metric and imperial thread cutting
8. Oil sight glass for head stock and gearbox
9. Adjustable taper roller bearings support the spindle
10. Overload clutch mechanism on auto power feed
11. Micro-adjustable length-stop onbed-way for accurate repetitive operation
12. 3.2HP/415V motor 16-speed(50-2000rpm)
13. Inching button is incorporated on the control panel for convenient spindle speed selection
14. Enclosed quick action gearbox for thread cutting and auto feeding
15. Powered longitudinal and cross feeds
16. D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
17. Removable gap bed-way for larger diameter jobs
18. Dual calibrated dials (except for saddle hand-wheel)
19. Chuck & change gear guards are fitted with micro switches
20. Coolant system with flexible hose
21. Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Available on backorder
Main features:
1. Very rigid machine bed withheavy ribbing
2. Wide V-guide,induction-hardened and precision-ground
3. Maximum accuracy and quietoperation even at high speeds
4. High machining performance withheavy-duty powerful main drive
5. Infinitely variable slip clutchallows working with stops
6. Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches
7. Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302
8. Removable gap bridge formachining of large diameter parts
9. Large spindle Capacity diameter80 mm for machining of long parts
10. To ensure maximum accuracy andsmooth operation at high speeds
11. The main spindle is dynamicallybalanced and supported by adjustable precision bearing
12. Camlock ASA D1-8 mount accordto DIN 55029
13. Centre lubrication pump for CAMbox and box way
14. Includes Time-Saving FootBrakes
15. Pull-out Chip Tray
16. Headstock gears run in an oilbath
17. Micrometer Stop
18. Full length splash guard
19. Foot brake
20. Coolant system
21. Halogen work lamp
22. Jog button and emergency stop
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine C6246
Available on backorder
Features
1.2axis digital readout system
2.Quickchange tool post
3.Triplebearings supporting headstock spindle
4.Adjustabletaper roller bearings providing spindle accuracy
5.PrecisionV-beds & headstock gears are all hardened & ground
6.Onepiece cast iron base increases rigidity
7.Overloadprotection on drive motor and coolant system
8.Universalenclosed gearbox incorporating metric & imperial thread capabilities
9.Inchingbutton incorporated on the control panel for convenient spindle speed selection
10.Footoperated spindle brake with safety cut out switch
11.300mmwide induction hardened heavy duty cast iron bed
12.Removablegap bed allowing work piece to swing up to 640mm
13.Chuckguard fitted with safety micro switch
14.Poweredlongitudinal and cross feeds
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CD6241
Available on backorder
Features:
1)One piece cast iron stand
2)Infinitely variable spindle speed
3)1500mm D.B.C available
4)Precision ground and hardened V-way bed
5)Totally enclosed universal gearbox allows cutting of inch,metric,whitworth,modular and diametrical threads
6)Headstock gears run in an oil bath and are hardened and precision ground for smooth,quiet and vibration free operation
Add to Wishlist
Add to Wishlist
Gap bed lathe machine C0632A
Available on backorder
Features
1.recision ground and supersonic frequency hardened bed ways
2.The spindle is supported with precision roller bearings
3.Headstock gears are made of high quality steel, ground and hardened
4.Spindle speed range 70-2000RPM
5.Sealed and easy operating feed box has various feeds and thread cutting functions
6. Coolant system
7.Apron-mounted spindle ON/OFF lever
8.Removablechip tray
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
