Filter
Sort:
Show:
F11,F12 series universal,semi-universal dividing head
Compare

F11,F12 series universal,semi-universal dividing head

Available on backorder
Main features: F11SERIES UNIVERSAL DIVIDING HEAD 1. The universal dividing head,Type F11100A,F11125,F11160A,F11200A is one of the most important attachment for milling machine. With the help of this dividing head the workpiece held between centers, or on a chuck can be rotate to any angle asesired and the periphery of a workpiece can be divided into any divisions of equal parts. By means of all kinds of cutters, the dividing head can also help milling machine to perform the milling operation for flute spur gear, spiral gear, spiral flute, Archimedean cam, helical flute and etc. 2. The dividing head, is equipped with a face plate that can be mounted onto the spindle nose. The workpiece canbe mounted on the face plate, thus, cutting can be carried out on 4-sides of a workpiece. 3. F11125C,F11160C is designed for the customers special needed, the shafting is improved to support heavy load. 4. The universal dividing head,type F11100AL, F11125AL, F11160AL is the same as of the structures and the operationhandle is setted on the left.   F12SERIES SEMI-UNIVERSAL DIVIDING HEAD 1. Type F12 series semi-universal dividing head is one of the most important attachment for milling machine. It can be used for simple indexing and divide circle into any equal parts, etc. 2. The F12 series with right hand wheel.
Add to Wishlist
Add to Wishlist
Diving head HF11260,HF11300,HF11400,HF12500,HF121000
Compare

Diving head HF11260,HF11300,HF11400,HF12500,HF121000

Available on backorder
Main features: 1.   Heavey HF12 seriessemi-universal dividing head is one of the most important attachment for Bigmilling machine 2.   It can be used for simpleindexing and divide circle into any equal parts, etc. 3.   Wight right handwheel
Add to Wishlist
Add to Wishlist
SEMI-UNIVERSAL DIVIDING HEAD BS-0,BS-1
Compare

SEMI-UNIVERSAL DIVIDING HEAD BS-0,BS-1

Available on backorder
Main features： 1.      Semi-Universal dividing head isa simple index center and can be used for direct and in direct dividing. 2.      Complete the gear, face, fluteprocessing and no need accessories, but the whole construction is the same as universal type. 3.      The 24 quick-dividing holes can complete 2,3,4,6,8,12,24division indexing. 4.      Attaches 3 dividing plate along with the dividing head indirect dividing in any division indexing 2-50, 51-380.
Add to Wishlist
Add to Wishlist
UNIVERSAL DIVIDING HEAD BS-2
Compare

UNIVERSAL DIVIDING HEAD BS-2

Available on backorder
Add to Wishlist
Add to Wishlist
SUPERIOR UNIVERSAL DIVIDING HEAD BS-3
Compare

SUPERIOR UNIVERSAL DIVIDING HEAD BS-3

Available on backorder
Main features: 1.   The BS-3 is designed and madeaccording to characteristics and advantages to all kinds of divid-ing heads,suitable for general dividing,gera and rack spindle cutting, in many use. 2.   Disigned for super hold 55.5mmof diameter, shaft hole, slope of end hole is Morse’s taper NO.6 AND bs-3 canbe adjusted from being level or vertical (0~90 degree) 3.   Its tailstock designed indovetail joint, very strong in structure which is available for heavy-dutyload, also the degree can be adjusted in every direction 4.   All the BS-3’s shaft, spindlecenter, worm and gear are made of super steels through grinding, heattreatment, to achieve rigid construction 5.   The ratio of worm and worm gearis 1:40 6.   The dividing plate is availablein two sides, A and B A Face 24,25,28,30,34,37,39,41,42,43 B Face 46,47,49,51,53,54,57,58,59,62,66 7.   The changeable gears are24,28,32,38,40,44,48,56,64,72,86 and 100
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Compare

shaping machine BC6085,BC60100

Available on backorder
Main features: 1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined plane which enlarge its using scope. 2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system. 3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting, the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine. 4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump. 5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine D2,D3,D4
Compare

Round Column Drilling Machine D2,D3,D4

Available on backorder
Features: 1.Can be used drilling, core drilling, reaming, boring, tapping,spot-facing and chamfering etc. 2. Electrical system conforms with IEC standards. 3. The worktable can be rotated 360°or leaned +-45°and operated easily. 4.Change Speed with gears and operate easily. 5.8 speed steps with positive torque transmission - no belt slippage. 6.Easy rpm adjustment via two shift levers and 2-step main motor. 7.Heavy construction with thick-walled column. 8.Hand wheel for vertical feed of head with solid dual-clamp. 8.Depth scale with adjustable depth stop. 10.Height adjustable table and head allow the user to set the optimal work height.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5032A
Compare

Round Column Drilling Machine Z5032A

Available on backorder
Features: 1.Gear driven system, 12 steps ofspindle speed. 2.Convenient loading andunloading tool device. 3.Automatic feed andtapping(Electromagnetic clutch),realize auto feed and tapping by putting anybutton on the feed handle. 4.CE or CSA or UL approved mainelectrical components. 5.Safety drill-guard withmicro-switch. 6.Worktable can be tilted ±45°and rotated ±180°round thecolumn. 7.Spindle box can be tilted ±45°and liftedup and down along the column. 8.Overload and short cutprotection 9.With coolant system
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5040E,Z5040
Compare

Round Column Drilling Machine Z5040E,Z5040

Available on backorder
Main features: 1.Ideal for industrial workshop use 2.Geared head drilling machine with 4 morse taper spindle 3.Thread tapping with auto reverse 4.Automatic feed range (0.1, 0.2mm/rev) 5.18 drilling speeds from 50-1450rpm 6.Chuck guard with micro-switch 7.Drill ejector incorporated in machine 8.Coolant pump system with flexible hose
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5030A,Z5035A,Z5040A,Z5050A
Compare

Round Column Drilling Machine Z5030A,Z5035A,Z5040A,Z5050A

Available on backorder
Main Features: 1.   New-designed,pleasing appearance,compact construction, wides speed change range,easy to operate. 2.   Easy operation with its uniqueworkable,and both motor-drive and manual-operated lifting device. 3.   The working table can be roteted180 and can be tited +45 and -45 also it is reliable and easy job can be done. 4.   Equipped with coolant systemand tapping mechanism. 5.   Equipped with short cut and overload protection, its electric, a system with powerful spindle-otormit designed according to           IEC standard. 6.   Characteristic protection device, small batch and mass production for drilling, counter boring, reaming,tapping, spot faing, ect.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5032Z,Z5040Z,Z5045Z
Compare

Round Column Drilling Machine Z5032Z,Z5040Z,Z5045Z

Available on backorder
Features: 1. With characteristic auto device for releasing tools, moreconvinent to change tools. 2. Worktable can be totated 3600 and also can be tilted 450 for easy operation. 3. Cyclic change ofspindle speed. 4. Headstock can beswiveled freely in per pendicular direction 5. Adjustable accurate depth setting withauto feed cut out for increased productivity 6. Both head and table are mounted on independentrack and pinions for ultimate positioning versatility 7. Coolant pump system with flexible hose 8. Work light mounted in convenient location
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine VD5032,VD5035,VD5040,VD5050
Compare

Round Column Drilling Machine VD5032,VD5035,VD5040,VD5050

Available on backorder
Main Feature: 1.220-575V with 3PH collocation is available 2.All main parts are made with quality cast iron 3.Gear shift 4.Thin oil lubrication is available for drilling diameter 40mm and 50mm,grease lubrication is available for others. 5.Worktable could be rotated and could be inclined±45°. 6.Superior quality of gears with hardened and lapped gears of surface 7.Importable electrical components with CE,CSA and UL standard. 8.Supply tachometer,depth gauge and elevating motor of VD5040NB,VD5040NAVD5050NA,VD5050NB,it as special order.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5030V,Z5035V,Z5040V,Z5050V
Compare

Round Column Drilling Machine Z5030V,Z5035V,Z5040V,Z5050V

Available on backorder
Main Feature: 1.3-phase with two- voltage for 220V~575V collocation 2.All main parts are made with quality cast iron 3.Single-speed motor, Germany original Lenze transducer spindle stepless timing for Z series. 4.Strength spindle, large diameter column,Trochoid lubrication pump 5.Worktable could be rotated and could be inclined ±45° 6.Motor driven lifting of worktable. 7.Digital readout for the display of speed and cutting depth 8.Micro feed is available. 9.Coolant System and fender device 10.Supply accessories Φ6~Φ16mm collet, handle of millingcutter,cross worktable,handle of collet, nut for t-slot, inner haxagonbolt 11.Importable electrical components with CE,CSA and UL standard 12.The model with A is electromagnetism clutch transmission feed, with B is mechanical feed.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine VD4025,VD4035NA
Compare

Round Column Drilling Machine VD4025,VD4035NA

Available on backorder
Main features： 1.Leveron gear head allows easy speed adjustment 2.Adjustable drill depth stop includes scale 3.Absolute concentricity ≤0,02 mm, measured at spindle 4.Left and right rotation allows thread cutting 5.Grey,cast-iron table includes T-slots and coolant grooves 6.Automatic tool release device and LED working light come standard 7.High concentricity - spindle runs on high-quality bearings 8.Hardened,polished gear wheels ensure smooth run 9. Solid, polished steel column is designed for constant use.
Add to Wishlist
Add to Wishlist
KXM10C
Compare

KXM10C

Available on backorder

Drill bit grinder KXM10C
  Main features:   1. Used for grinding of HSS andcarbide engraving cutters with single and multiple flutes in various shapes. 2. The cutters are held by 5C collets in the end mill grinding attachement 3. With the accessories provided the universal  D  bit grinder can be set up to grind end mills, slot drills and drill bits 4. For more information see the manual 5. Base, wheel mount, grinding wheel, operating tools, manual, spare parts list, test certificate, collets 3,4, 6, 8, 10mm
Add to Wishlist
Add to Wishlist
LTG200
Compare

LTG200

Available on backorder

Universal Tool Grinder Machine LTG200

Features:

1.For grinding of various tools, e.g. drills, millingcutters, turning tools etc.

2.Stand serially equipped with tool rest.

3.Large number of standard accessories.

4.Solid construction for vibration-free run.

5.Ergonomically arranged control elements.

6.Universal Grinder for grinding various tools, likedrills, milling cutters, turning tools, etc.

7.Wide range of applications.

8.Extensive accessories included.
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status