0
0 items
KSh0.00
No products in the cart.
Electric power feed ALGS series
Available on backorder
Main features:
1. Small volume, convenient installation
2. Simple operation of the current protection device, at a touch device can return towork in
3. The out put torque and low noise
4. Make sure the voltage ofworking environment .
5. Choose the exact input pointand well fix up
6. Make sure whole screws oftransformer are well locked.
7. Setting transformer onstable and dry wall.
8. Collecting cable and wire onthe wire box of working place
9. Keeping from accident caused,do not disassemblee and refit locked parts or wiring of transformer whenassembly proceeding
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine D2,D3,D4
Available on backorder
Features:
1.Can be used drilling, core drilling, reaming, boring, tapping,spot-facing and chamfering etc.
2. Electrical system conforms with IEC standards.
3. The worktable can be rotated 360°or leaned +-45°and operated easily.
4.Change Speed with gears and operate easily.
5.8 speed steps with positive torque transmission - no belt slippage.
6.Easy rpm adjustment via two shift levers and 2-step main motor.
7.Heavy construction with thick-walled column.
8.Hand wheel for vertical feed of head with solid dual-clamp.
8.Depth scale with adjustable depth stop.
10.Height adjustable table and head allow the user to set the optimal work height.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5032A
Available on backorder
Features:
1.Gear driven system, 12 steps ofspindle speed.
2.Convenient loading andunloading tool device.
3.Automatic feed andtapping(Electromagnetic clutch),realize auto feed and tapping by putting anybutton on the feed handle.
4.CE or CSA or UL approved mainelectrical components.
5.Safety drill-guard withmicro-switch.
6.Worktable can be tilted ±45°and rotated ±180°round thecolumn.
7.Spindle box can be tilted ±45°and liftedup and down along the column.
8.Overload and short cutprotection
9.With coolant system
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5040E,Z5040
Available on backorder
Main features:
1.Ideal for industrial workshop use
2.Geared head drilling machine with 4 morse taper spindle
3.Thread tapping with auto reverse
4.Automatic feed range (0.1, 0.2mm/rev)
5.18 drilling speeds from 50-1450rpm
6.Chuck guard with micro-switch
7.Drill ejector incorporated in machine
8.Coolant pump system with flexible hose
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5030A,Z5035A,Z5040A,Z5050A
Available on backorder
Main Features:
1. New-designed,pleasing appearance,compact construction, wides speed change range,easy to operate.
2. Easy operation with its uniqueworkable,and both motor-drive and manual-operated lifting device.
3. The working table can be roteted180 and can be tited +45 and -45 also it is reliable and easy job can be done.
4. Equipped with coolant systemand tapping mechanism.
5. Equipped with short cut and overload protection, its electric, a system with powerful spindle-otormit designed according to IEC standard.
6. Characteristic protection device, small batch and mass production for drilling, counter boring, reaming,tapping, spot faing, ect.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5032Z,Z5040Z,Z5045Z
Available on backorder
Features:
1. With characteristic auto device for releasing tools, moreconvinent to change tools.
2. Worktable can be totated 3600 and also can be tilted 450 for easy operation.
3. Cyclic change ofspindle speed.
4. Headstock can beswiveled freely in per pendicular direction
5. Adjustable accurate depth setting withauto feed cut out for increased productivity
6. Both head and table are mounted on independentrack and pinions for ultimate positioning versatility
7. Coolant pump system with flexible hose
8. Work light mounted in convenient location
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine VD5032,VD5035,VD5040,VD5050
Available on backorder
Main Feature:
1.220-575V with 3PH collocation is available
2.All main parts are made with quality cast iron
3.Gear shift
4.Thin oil lubrication is available for drilling diameter 40mm and 50mm,grease lubrication is available for others.
5.Worktable could be rotated and could be inclined±45°.
6.Superior quality of gears with hardened and lapped gears of surface
7.Importable electrical components with CE,CSA and UL standard.
8.Supply tachometer,depth gauge and elevating motor of VD5040NB,VD5040NAVD5050NA,VD5050NB,it as special order.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine Z5030V,Z5035V,Z5040V,Z5050V
Available on backorder
Main Feature:
1.3-phase with two- voltage for 220V~575V collocation
2.All main parts are made with quality cast iron
3.Single-speed motor, Germany original Lenze transducer spindle stepless timing for Z series.
4.Strength spindle, large diameter column,Trochoid lubrication pump
5.Worktable could be rotated and could be inclined ±45°
6.Motor driven lifting of worktable.
7.Digital readout for the display of speed and cutting depth
8.Micro feed is available.
9.Coolant System and fender device
10.Supply accessories Φ6~Φ16mm collet, handle of millingcutter,cross worktable,handle of collet, nut for t-slot, inner haxagonbolt
11.Importable electrical components with CE,CSA and UL standard
12.The model with A is electromagnetism clutch transmission feed, with B is mechanical feed.
Add to Wishlist
Add to Wishlist
Round Column Drilling Machine VD4025,VD4035NA
Available on backorder
Main features：
1.Leveron gear head allows easy speed adjustment
2.Adjustable drill depth stop includes scale
3.Absolute concentricity ≤0,02 mm, measured at spindle
4.Left and right rotation allows thread cutting
5.Grey,cast-iron table includes T-slots and coolant grooves
6.Automatic tool release device and LED working light come standard
7.High concentricity - spindle runs on high-quality bearings
8.Hardened,polished gear wheels ensure smooth run
9. Solid, polished steel column is designed for constant use.
Add to Wishlist
Add to Wishlist
Bed-type milling machine BM 5150
Available on backorder
Main features:
1.Lifting motor with adjustable dovetail guiding allowsheight adjustment of the mill head
2.Automatic table feed with rapid feed allows quick tableadjustment in x- and y-axis
3.Complete with digital readout in all three axis toincrease productivity
4.Automatic spindle feed (0.1 / 0.15 and 0.3 mm / rev.)comes standard
5.Use clutch to change from manual to fine feed
6.Wide speed range 94 - 2256 rpm
7.Large number of standard accessories
8.Robust, heavy machine design guarantees accurateresults
9.Spindle feed via handwheel when milling
10.Spindle feed via star handle when drilling
Add to Wishlist
Add to Wishlist
Bed-type milling machine XA7140
Available on backorder
Main features:
1. Solid, grey cast iron construction allows heavy table load
2. Large flat guide guarantees stability at heavy milling
3. Hand wheel allows feed (100 mm) of oversize spindle
4. Polished table, supported well by wide saddle
5. Wide speed range (20 - 1800rpm) feat. high torque and spindle brake
6. Step less speed adjustment comes standard
7. Inductive hardened and polished guide ways
8. Reinforced saddle in robust box construction
9. Column and machine stand are solidly designed
Add to Wishlist
Add to Wishlist
Bed-type milling machine X715
Available on backorder
Main features:
1. Rigid grey cast-ironconstruction allows heavy work load
2. Universal milling head system"Huron" can be adjusted to various angles
3. Solid flat guiding guarantees stability at heavy milling
4. Complete with swivel arm and clearly arranged control panel
5. Inductive hardened and polished guidings
6. Stepless feed adjustments inall axis
7. Reinforced saddle in robust box construction
8. Precisely polished table,ideally positioned on wide saddle
9. Column and stand in solid box construction
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
