0
0 items
KSh0.00
No products in the cart.
K11,K11A 3-jaw Self-centering chuck
Available on backorder
Main features:
1. K11 series Three-jawSelf-centring chuck is subdivided into three types,K11,K11A.
2. Type K11 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K11A provides,ISO3442standard clutches.
4. Soft clutches are to beprovided on request,higher centring accuracy can be achieved after being rubbedon the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K12,K12A 4-jaw Self-centering chuck
Available on backorder
Main features:
1. K12 series Three-jawSelf-centring chuck is subdivided into three types,K12,K12A.
2. Type K12 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K12A provides,ISO3442standard clutches.
4. Soft clutches are to be provided on request,higher centring accuracy can be achieved after being rubbed on the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K12,K12A 4-jaw Self-centering chuck
Available on backorder
Main features:
1. K12 series Three-jawSelf-centring chuck is subdivided into three types,K12,K12A.
2. Type K12 provides two sets ofclutches in different directions,which can be used respectively.
3. Type K12A provides,ISO3442standard clutches.
4. Soft clutches are to beprovided on request,higher centring accuracy can be achieved after being rubbedon the machine,so as to satisfy the need for holding.
Add to Wishlist
Add to Wishlist
K72 series 4-jaw Independent chuck
Available on backorder
Main features：
1.Material:HT300
2.Size:80-2000mm
3.Independentchuck with manual gripping
4. Certaindiscount is given on large quantities
Add to Wishlist
Add to Wishlist
GK11 series steel body 3-jaw self-centering chuck
Available on backorder
Main features:
1. STEEL BODY：DIN6350, DIN55026, DIN55027, DIN55029
2. Top accuracy & qualityforged steel, high speed
3. Precision lathe chucks have topaccuracy and the gurantee to maintain this accuracy for an extended period oftime
4. These chucks have a modern andcompact design
5. They can be used wherever highprecision machining is demanded
Add to Wishlist
Add to Wishlist
GK12 series steel body 3-jaw self-centering chuck
Available on backorder
Main features:
1. STEEL BODY：DIN6350, DIN55026, DIN55027, DIN55029
2. Top accuracy & qualityforged steel, high speed
3. Precision lathe chucks have topaccuracy and the gurantee to maintain this accuracy for an extended period oftime
4. These chucks have a modern andcompact design
5. They can be used wherever highprecision machining is demanded
Add to Wishlist
Add to Wishlist
Europe Sawing Machine BS-170G
1 in stock
Main features:
1.Rigid cast-iron design with steel base serving as utility shelf
2.Two speeds for optimum cutting of metal
3.Coolant pump ensures ensures longer service life of saw blade
4.Scale on the vise allows easy adjustments for angle cuts
5.Quick adjusting vise for angular cuts-the saw frame swivels, not the material
Add to Wishlist
Add to Wishlist
Europe Sawing Machine EBS-5025
1 in stock
Main features:
1. One piece cast-iron construction of the saw frame ensure exact angles and low vibration
2. for miter cuts, the operator moves the saw frame, not the material
3. Hydraulic cylinder for infinitely variable saw frame feed
4. 2 saw blade speeds
5. pressure gauge indicates exact saw blade tension
6. rigid vise with quick action clamping and linear stop
7. dual ball bearing in the saw blade guide
8. coolant system and heavy base are included
Add to Wishlist
Add to Wishlist
Europe Sawing Machine EBS-4023,4017
1 in stock
Features:
1. European design band saw features European design, dovetail-type clamp movement and locking mechanism
2. It features quick adjusting vise for angular cuts-the saw frame swivels, not the material
3. Rigid cast-iron design with steel base serving as utility shelf
4.Two speeds for optimum cutting of metal.
5. The saw bow can rotate from 0° to 45°, it has the characteristics of worm gear box transmission structure
6. The calibration of the jaw is convenient for adjustment and positioning at any angle (Scale on the vise allows easy adjustments for angle cuts)
7. The falling speed of saw bow is controlled by hydraulic cylinder
8. The European design band saw has a sizing device (machine will stop automatically after sawing materials)
9. The European design band saw has power break protection device (machine will power off automatically when the rear protective cover is opened)
10. Cooling system of the European design band saw can prolong the service life of saw blade and improve the precision of work piece
11. It is equipped with a block feeder (with fixed sawing length)
Add to Wishlist
Add to Wishlist
Europe Sawing Machine EBS-5027
1 in stock
Main features:
1. One piece cast-ironconstruction of the saw frame ensure exact angles and low vibration
2. For miter cuts, the operatormoves the saw frame, not the material
3. Hydraulic cylinder forinfinitely variable saw frame feed
4. 2 saw blade speeds
5. Pressure gauge indicates exactsaw blade tension
6. Rigid vise with quick actionclamping and linear stop
7. Dual ball bearing in the sawblade guide
8. Coolant system and heavy baseare included
Add to Wishlist
Add to Wishlist
Europe Sawing Machine EBS-315G,EBS-315GH
1 in stock
Features：
1. It is the precise sawing machine features European design and large size.
2. The European design band saw has the advantage of double-speed selection. It is characterized by manual/automatic operation mode.
3. The saw bow can rotate around.
4. The European design band saw has powerbreak device (the machine will automatically power off when the rear protectivecover is opened).
5. The falling speed of saw bow is controlled by hydraulic cylinder.
6. It is equipped with a block feeder (with fixed sawing length).
7. The European design band saw has sizing device (the machine will automatically stop after sawing the materials).
8. The hydraulic system of the European design band saw automatically controls the up and down of saw bow and the tightness and looseness of the jaw.
9. The cooling system of the European design band saw can prolong the service life of saw blade and improve the precision of the workpiece.
10. The European design band saw has an optional PLC control system.
Add to Wishlist
Add to Wishlist
Europe Sawing Machine EBS-460G
1 in stock
Main Features:
1. High-capacity band control by two-speed motor
2. Vertical rotation on bolt with adjustable tapered bearings without back lash
3. Band stretching is obtained by electro-mechanical blade tensioner with micro switch
4. It is the precise sawing machine features European design and large size.
5. It is European design band saw has the advantage of double speed selection.
6. It is characterized by manual/automatic operation mode.
7. The saw bow can rotate around.
8. The European design band saw has power break device (the machine will automatically power off
when the rear protective cover is opened).
9. The falling speed of saw bow is controlled by hydraulic cylinder.
10. It is equipped with a block feeder (with fixed saw length).
11. The European design band saw has sizing device (the machine will automatically stop after sawing the materials).
12. The hydraulic system of the European design band saw automatically controls the up and down of saw bow and
the tightness and looseness of the jaw.
13. The cooling system of the European design band saw can prolong the service life of saw blade and improve the
precision of the workpiece.
14. The European design band saw has an optional PLC system.
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Available on backorder
Main features:
1. Induction hardened, precision ground V-way bed.
2. D1-4 spindleis supported by high quality tapered roller bearing.
3. Hardened,precision ground gears in headstock.
4. High precision directly mounting chuck.
5. Carriage mounted spindle control lever.
6. Automatic feed and threading are fully interlocked.
7. Tailstock maybe offset for turning tapers.
8. One-piece casting iron base allows heavy cuts.
9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Available on backorder
Main features:
1.2 Axis digital readout system
2.Quick change toolpost with 5 holders
3.Concertina leadscrew cover
4.Gear drive headstock for quick change of spindle speeds
5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting
6.Foot operated spindle brake with safety cut out switch
7.Change gears for metric and imperial thread cutting
8.Adjustable taper roller bearings support the spindle
9.Inching button is incorporated on the control panel for convenient spindle speed selection
10.Enclosed quick action gearbox for thread cutting and auto feeding
11.Powered longitudinal and cross feeds
12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Available on backorder
Main features:
1. Gear drive headstock for quick change of spindle speeds
2. Cast iron stand increasing rigidity and reducing vibration
3. Precision V-beds are hardened and ground, incorporating a rigid webbed casting
4. Low voltage work light
5. Foot operated spindle brake with safety cut out switch
6. Slide out front swarf tray for easy cleaning
7. Change gears for metric and imperial thread cutting
8. Oil sight glass for head stock and gearbox
9. Adjustable taper roller bearings support the spindle
10. Overload clutch mechanism on auto power feed
11. Micro-adjustable length-stop onbed-way for accurate repetitive operation
12. 3.2HP/415V motor 16-speed(50-2000rpm)
13. Inching button is incorporated on the control panel for convenient spindle speed selection
14. Enclosed quick action gearbox for thread cutting and auto feeding
15. Powered longitudinal and cross feeds
16. D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
17. Removable gap bed-way for larger diameter jobs
18. Dual calibrated dials (except for saddle hand-wheel)
19. Chuck & change gear guards are fitted with micro switches
20. Coolant system with flexible hose
21. Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Available on backorder
Main features:
1. Very rigid machine bed withheavy ribbing
2. Wide V-guide,induction-hardened and precision-ground
3. Maximum accuracy and quietoperation even at high speeds
4. High machining performance withheavy-duty powerful main drive
5. Infinitely variable slip clutchallows working with stops
6. Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches
7. Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302
8. Removable gap bridge formachining of large diameter parts
9. Large spindle Capacity diameter80 mm for machining of long parts
10. To ensure maximum accuracy andsmooth operation at high speeds
11. The main spindle is dynamicallybalanced and supported by adjustable precision bearing
12. Camlock ASA D1-8 mount accordto DIN 55029
13. Centre lubrication pump for CAMbox and box way
14. Includes Time-Saving FootBrakes
15. Pull-out Chip Tray
16. Headstock gears run in an oilbath
17. Micrometer Stop
18. Full length splash guard
19. Foot brake
20. Coolant system
21. Halogen work lamp
22. Jog button and emergency stop
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
