Filter
Sort:
Show:
Center drill
Compare

Center drill

Available on backorder
Main Features: 1.Standard: Double Ended 2.Process: Fully Ground 3.Surface: Bright 4.Material: HSS 4341/9341/M2/M35 5.Advantage: High Performance 6. this drills have flutes and cutting points on both ends. thisallows the user with the ability to reverse the drill and utilize both ends. 7.135 split point starts drilling immediately. 8.twice as many holes as a single end drill bit. 9.used primarily in small machine shops and automatic body shopsfor drilling holes for  sheet metal screws or rivets. 10. for drilling thin sheet metals, steel sheet, sheet brass,sheet aluminum and plastic sheets. 11.Available in plain(A),bell(B) and radius(R)type
Add to Wishlist
Add to Wishlist
End Mill Cutter 327-2-2,327-2-25
Compare

End Mill Cutter 327-2-2,327-2-25

Available on backorder

Main Features:

1.      Full grinding 2.      Din 327 standards 3.      Helical angle 30 degree 4.      Shorter or longer are available 5.      Material HSS 6.     Coated with TI is available
Add to Wishlist
Add to Wishlist
End Mill Cutter 844-4-2,844-4-37
Compare

End Mill Cutter 844-4-2,844-4-37

1 in stock
Main Features: 1.      Full grinding 2.      Din 844 standards 3.      Helical angle 30 degree 4.      Shorter or longer are available 5.     Material HSS 6.     Coated with TI available
Add to Wishlist
Add to Wishlist
End Mill Cutter 2-Flute,4-Flute
Compare

End Mill Cutter 2-Flute,4-Flute

1 in stock
Main Features:  1.TiN-coated, 2 - 5 times longer service life 3.double cutting power 4.improved part surface 5.DIN 327 D, short length 6.Designed with 2 cutting edges. Face teethfor centric cuts. For cutting keyways/grooves (P 9 fitting) and center cut-out.Vertical or side cutting possible, with cyl. shaft and side drive dog acc. toDIN 1835 B, 3, 4, 5, 6, 8, 10, 12, 14, 18, 20 mm 7.DIN 844 B, short length 8.Designed with 4 cutting edges with 30°right-hand spiral for excellent chip removal. Facing teeth for centric cuts.For normal to hard materials with cyl. shaft and side drive dogs DIN 1835 B, 3,4, 5, 6, 8, 10, 12, 14, 18, 20 mm
Add to Wishlist
Add to Wishlist
Bead bending machine RM08
Compare

Bead bending machine RM08

Available on backorder
Features: 1. The Rotary machine, the same as the ordinary beading machine,is used for blank pressing, arc pressing and so on for various plates. 2. Rotary machine includes 6 sets standard rollers 3. can be forming different shapes to meet various processing demands. 4. Adjustable roll pressure by means of top mounted hand crank. 5. Can be used in both forward and reverse 6. Can be operated smooth, fast and precisely. 7. Table mount with clamp is standard
Add to Wishlist
Add to Wishlist
Bead bending machine TB-12
Compare

Bead bending machine TB-12

Available on backorder
Features: 1. The Bead bending machine makes swaged plate, connection andso on of circular pipes, which refer to crushing the thin plates into the ribsin certain  shapes. 2. The rigidity of the plates, pipes or metal components isstrengthened. 3. Heavy and solid cast iron construction 4. Special steel adjustable bottom spindle 5. Complete with stand 4 sets standard rollers
Add to Wishlist
Add to Wishlist
Bead bending machine ETB-12
Compare

Bead bending machine ETB-12

Available on backorder
Features: 1. The Bead bending machine makes swaged plate, connection andso on of circular pipes, which refer to crushing the thin plates into the ribsin certain shapes. 2. The rigidity of the plates, pipes or metal components isstrengthened. 3. Heavy and solid cast iron construction 4. Special steel adjustable bottom spindle 5. Complete with stand 4 sets standard rollers 6. Self-braking motor with subframe (E-type model ETB-12) 7. Easy to operate with foot pedal control (E-type model ETB-12)
Add to Wishlist
Add to Wishlist
Bead bending machine ETB-25,40
Compare

Bead bending machine ETB-25,40

Available on backorder
Features: 1. The Bead bending machinemakes swaged plate, connection and so on of circular pipes, which refer tocrushing the thin plates into the ribs in certain shapes. 2. The rigidity of the plates,pipes or metal components is strengthened. 3. Steel welded constructionframe 4. Adjustable idle roller 5. Steel shaft with bronzebushings 6. Reduction motor with brakesystem 7. Movement of rollers withfoot pedal 8. Complete with stand 9. 4 sets standard rollers
Add to Wishlist
Add to Wishlist
Bead bending machine RM-A,RM-B
Compare

Bead bending machine RM-A,RM-B

Available on backorder
Features: 1. Hardened steel rollers 2. Head rotates 360 degree 3. Can bench mounded with “EZ Edge Finder” 4. Main technical parameter
Add to Wishlist
Add to Wishlist
Round bending machine RBM10,ERBM10HV
Compare

Round bending machine RBM10,ERBM10HV

Available on backorder
Main features: 1.   Horizontal and verticaloperation （For HV series） 2.   With standard foot pedal 3.   Special cast frame 4.   Shafts are hardened withspecial steel material 5.   Rollers are special steelmaterial hardened and grounded 6.   Gears Milled with full material 7.   Optional rollers for choice
Add to Wishlist
Add to Wishlist
Round bending machine RBM30,RBM30HV
Compare

Round bending machine RBM30,RBM30HV

Available on backorder
Main features: 1.   Horizontal and verticaloperation 2.   With standard foot pedal 3.   Special cast frame 4.   Shafts are hardened withspecial steel material 5.   Rollers are special steelmaterial hardened and grounded 6.   Gears Milled with full material 7.   Optional rollers for choice
Add to Wishlist
Add to Wishlist
Round bending machine RBM40HV,HRBM40HV
Compare

Round bending machine RBM40HV,HRBM40HV

Available on backorder
Main features: 1.   Horizontal and verticaloperation 2.   With standard foot pedal 3.   Special cast frame+ 4.   Shafts are hardened withspecial steel material 5.   Rollers are special steelmaterial hardened and grounded 6.   Gears Milled with full material 7.   Optional rollers for choice 8.   HRBM40HV with hydraulic control
Add to Wishlist
Add to Wishlist
Round bending machine RBM50,HV,HRBM50HV
Compare

Round bending machine RBM50,HV,HRBM50HV

Available on backorder
Main features: 1.   Horizontal and verticaloperation （For HV series） 2.   With standard foot pedal 3.   Special cast frame+ 4.   Shafts are hardened withspecial steel material 5.   Rollers are special steelmaterial hardened and grounded 6.   Gears Milled with full material 7.   Optional rollers for choice 8.   HRBM50HV with hydraulic control
Add to Wishlist
Add to Wishlist
Hydraulic round bending machine HRBM65
Compare

Hydraulic round bending machine HRBM65

Available on backorder
Main features: 1.   With Mobile control panel 2.   Steel-welded construction frame 3.   Shafts are hardened withspecial steel material 4.   Rollers are special steelmaterial hardened and grounded 5.   Gears Milled with full material 6.   Top roll hydraulic moveable 7.   With hydraulic motor
Add to Wishlist
Add to Wishlist
Hydraulic notching machine Q28YA,Q28YB
Compare

Hydraulic notching machine Q28YA,Q28YB

Available on backorder
Main  features: 1.   This equipment is mainly used for cutting metal and non-metal materials. 2.   Large rangefor nothing angle with high notching speed and precision. 3.   For the anglefrom 30m degree to 140 degree can be processed according to the symmetry adjustment,suitableto notching various thickness and material sheets with bright and smooth notch. 4.   The blade materials with high alloy steel.(Cr12MoV),quenching hardness of HRC 58/62. 5.   surface finishing,makes the tool life and processing quality is guaranteed. 6.   This machine has the process speed,high quality,reliable control,simple operation
Add to Wishlist
Add to Wishlist
Electric Folding Machine EFMS 2020;EFMS 2520;EFMS 3020
Compare

Electric Folding Machine EFMS 2020;EFMS 2520;EFMS 3020

Available on backorder
Features: 1.With foot pedal for operation and relaxhands. 2.Segments:25,30,35,40,45,50,75,100,150,200,200,270,400,400mm
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status