Filter
Sort:
Show:
Center drill
Compare

Center drill

Available on backorder
Main Features: 1.Standard: Double Ended 2.Process: Fully Ground 3.Surface: Bright 4.Material: HSS 4341/9341/M2/M35 5.Advantage: High Performance 6. this drills have flutes and cutting points on both ends. thisallows the user with the ability to reverse the drill and utilize both ends. 7.135 split point starts drilling immediately. 8.twice as many holes as a single end drill bit. 9.used primarily in small machine shops and automatic body shopsfor drilling holes for  sheet metal screws or rivets. 10. for drilling thin sheet metals, steel sheet, sheet brass,sheet aluminum and plastic sheets. 11.Available in plain(A),bell(B) and radius(R)type
Add to Wishlist
Add to Wishlist
BT shell mill arbors
Compare

BT shell mill arbors

Available on backorder
Main features：
  1. High quality elastic steel material with long use time.
  2. Type: A AD AD/B
  3. Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
  4. Suitable Facing Cutter:13mm-50mm
  5. The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
  6. Holder hardness:48-55HRC
  7. Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Compare

BT drill chuck arbors

Available on backorder
Main features: 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.  
Add to Wishlist
Add to Wishlist
BT End mill adapters
Compare

BT End mill adapters

Available on backorder
Main features： 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Compare

BT morse taper with tang

Available on backorder
Main features：   1, The material: Allyed case hardened steel, black-finished and precisely grinded 2, The precision: 0.005mm 3, The hardness: 52-58HRC 4, Surface: black, sand-blasting 5, Taper tolerance: AT3 6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Compare

BT milling chuck arbors

Available on backorder
Main features： 1.material:20CrMnTi 2.Comprehensive Accuracy:0.005mm 3.hardness:HRC56°-60°,carbon depth>0.8mm 4.Balanced G6.3/12000rpm,G2.5/20000rpm available 5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Compare

HSK ER collect chuck

Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Compare

HSK end mill holder

Available on backorder
Main features： 1.The material: Allyed case hardened steel, black-finished and precisely grinded 2.Taper tolerance: AT3 Standard 3.Hardness: 50-55HRC 4.Run out: 0.005mm 5.Coolant: AD, ADB, B type 6.Surface: blacken, sand blasting, plating 7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Compare

HSK shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Compare

HSK combi-shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
Vernier calipers 130 series
Compare

Vernier calipers 130 series

Available on backorder
Features 1.Vernier Calipers are made precisely by high quality steel or stainless steel throughout better heat treatment and surface treatment. 2.Their precision high, lifelong, rust resisting and easy to use. 3.They are mainly used for measuring internal, external, depth and steps dimensions. 4.We have Metric, Metric&Inch for supply. 5.According to accuracy, we have 0.05mm and 0.02mm. 6.Accoring to material, there arecarbon steel and stainless steel, choose by customer.
Add to Wishlist
Add to Wishlist
Digital horizontal scale
Compare

Digital horizontal scale

Available on backorder
Features 1.Manual power on/off 2.Zero setting at any position. 3.Metric/lnch system conversion at any position. 4.With data output interface. 5.With data presetting function. 6.Absolute measurement and comparison measurement conversion at any position.
Add to Wishlist
Add to Wishlist
Digital vertical scale
Compare

Digital vertical scale

Available on backorder
Features 1.Manual power on/off 2.Zero setting at any position. 3.Metric/lnch system conversionat any position. 4.With data output interface. 5.With data presetting function. 6.Absolute measurement and comparison measurement conversion at any position.
Add to Wishlist
Add to Wishlist
ELECTRIC OUTSIDE MICROMETER FOR DIY MARKET EOM-1,EOM-12,EOM-25A,EOM-300A
Compare

ELECTRIC OUTSIDE MICROMETER FOR DIY MARKET EOM-1,EOM-12,EOM-25A,EOM-300A

Available on backorder
Main Features 1.Display data is origin data of absolute measurement after changing battery 2.Painted frame 3.Carbide measuring face 4.Criterion: DIN863/1 DIN40050/IEC529 5.Ratchet friction thimble
Add to Wishlist
Add to Wishlist
ELECTRONIC OUTSIDE MICROMETER OF IP54
Compare

ELECTRONIC OUTSIDE MICROMETER OF IP54

Available on backorder
Main features: 1.Protection level IP54 2.Display data is origin data of absolute measurement after changing battery 3.Painted frame 4.Carbide measuring face 5.Criterion: DIN863/1 DIN40050/IEC529 6.Ratchet friction thimble
Add to Wishlist
Add to Wishlist
MICROMETER WITH INTERCHANGEABLE ANVIL
Compare

MICROMETER WITH INTERCHANGEABLE ANVIL

Available on backorder
Main Features： 1.Micrometer with interchangeable anvils 2.Steel-plate frame 3.Carbide measuring faces 4.Resolution: 0.01mm(Metric);  0.0001″(Inch)
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status