0
0 items
KSh0.00
No products in the cart.
BT shell mill arbors
Available on backorder
Main features:
- High quality elastic steel material with long use time.
- Type: A AD AD/B
- Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
- Suitable Facing Cutter:13mm-50mm
- The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
- Holder hardness:48-55HRC
- Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Available on backorder
Main features:
1.Made from carburized alloy steel, work surface hardness to HRC58~62.
2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed
running to protect the spindle.
3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT End mill adapters
Available on backorder
Main features:
1.Made from carburized alloy steel, work surface hardness to HRC58~62.
2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed
running to protect the spindle.
3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Available on backorder
Main features:
1, The material: Allyed case hardened steel, black-finished and precisely grinded
2, The precision: 0.005mm
3, The hardness: 52-58HRC
4, Surface: black, sand-blasting
5, Taper tolerance: AT3
6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Available on backorder
Main features:
1.material:20CrMnTi
2.Comprehensive Accuracy:0.005mm
3.hardness:HRC56°-60°,carbon depth>0.8mm
4.Balanced G6.3/12000rpm,G2.5/20000rpm available
5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Available on backorder
Main features:
1.The material: Allyed case hardened steel, black-finished and precisely grinded
2.Taper tolerance: AT3 Standard
3.Hardness: 50-55HRC
4.Run out: 0.005mm
5.Coolant: AD, ADB, B type
6.Surface: blacken, sand blasting, plating
7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Available on backorder
Main features:
1. Material: 20CrMnTi
2. Accuracy: 0.005mm
3. Hardness: HRC48-52
4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools
5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Available on backorder
Main features:
1. Material: 20CrMnTi
2. Accuracy: 0.005mm
3. Hardness: HRC48-52
4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools
5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
Manual Surface Grinding Machine MJ7115 |
Features: 1. Surface grinding is designed to grind various horizontal and vertical surfaces of the workpieces and endfaces of the grinding wheel. 2. It can also grind various contoured workpieces with shaped wheel or crafts manship apparatus. 3. Integrated grinding head of high quality, high rigidity and accuracy. 4. Small size, light weight,easy operation & maintenance. 5. Centralized lubrication for oil pump. 6. Super slide table 7.Enclosed cabinet style stand 8.Swarf guard 9.One shot lubrication 10.Diamond wheel dresser with holder 11.Tool Box 12.Wheel balancing kit 13.Single phase 3450 RPM motor |
Add to Wishlist
Add to Wishlist
M618A,M820
Available on backorder
Manual Surface Grinding Machine M618A,M820 |
Mainfeatures: 1.Quality castings and Precision ball bearing supporting thespindle 2.Coolant system with nozzle and flow control valve 3.Cast iron machine body and stand for maximum rigidity andsmooth operation 4.The machine can grind all kinds of surfaces or grind complex surfaces by dressing of grinding wheel. 5.The machineis suitable for grinding without auto feed and is installed with permanentmagnetic chuck or electromagnetic chuck according to customer’s requirement. 6.Vertical dial graduations 0.01mm,Cross travel graduations 0.02mm 7.Manual one shot lubrication pump 8.Wheel balancing stand and arbor 9.Halogen work light |
Add to Wishlist
Add to Wishlist
CNC internal grinding machine M2110CNC
Available on backorder
Feature | |
NC control with English display | |
Belt driven spindle | |
lighting system LED type, IP65 | |
facility of auto lubrication syste for guide ways and screw | |
coolant tank | |
coolant flow from work spindle end facility | |
backlight in operator panel | |
cross roller guide ways for feeding axis | |
machine should be suitable for tool rom work and production work | |
roll dressing system for profril dressing |
Add to Wishlist
Add to Wishlist
UNIVERSAL CYLINDARCAL GRINDING MACHINE M1408X300
Available on backorder
Machine Feature
The machine is mainly used for grinding cylinder or cone surface of small axle, round set, needle valve, piston, etc. Tooling way can be top, three claws chuck, spring card head and special jig realized. Apply to process small parts such as meter , cars, mechanical and electrical, bearing, textile, ship, sewing machine, machine industry
The vertical movement of machine worktable have hydraulic and manual. Grinding wheel frame and head frame all can be turn. Hydraulic system uses good performance of the gear pump
The machine suitable for tools, maintenance and small and medium batch production workshop .
The top of machine is divided into 300 mm
Add to Wishlist
Add to Wishlist
UNIVERSAL CYLINDRICAL GRINDING MACHINE M1420X800
Available on backorder
1.Table can be tilted for conical grinding operations and scale allows adjustment to desired position
2.Spindle stock can be swivelled 180° for inside grinding operations
3.Main spindle is mounted hydro-dynamically – oil film prevents contact between spindle and bearing
4.Longitudinal table guide and grinding spindle stock cross guide feature V- and flat guiding each
5.Strong reinforcements and generously designed walls make the machine base resistant to temperature fluctuations and deformations
6.Oil film between spindle and bearing reduces the vibrations to a minimum to achieve top results and high accuracy
7.Stepless feed adjustment with selective programmable stop at end of each table movement
8.Precisely adjusted spindle head and solid grinding spindle stock to achieve top processing results at various grinding operations
9.Precisely polished and manually finished guideways in x- and y-axis
10.Hydraulic or manual resetting of grinding spindle stock
11.Longitudinal movement of table is either manually by handwheel or automatically by hydraulic feed
12.Grinding spindle features bearings on both sides and adjustable sliding flat grids
Add to Wishlist
Add to Wishlist
UNIVERSAL CYLINDRICAL GRINDING MACHINE M1450
Available on backorder
1.The left and right guide rail adopts P-V structure, which is scraped by high precision manual, sothat the whole system products have high precision and high stability.
2.The front and rear feed guide rail of grinding wheel can choose roller and wire rail structure
3.Classic control mechanism, simple, safe and reliable.
4.M1350, M1450, M1363 series worktable and grinding wheel guide rail adopts high stablehydrostatic guide rail, high rigid dynamic and static pressure spindle.
5.Universal workhead can be adjusted at any Angle within 90 degrees counterclockwise to adapt tochuck grinding internal and external conical workpiece.
Add to Wishlist
Add to Wishlist
UNIVERSAL CYLINDRICAL GRINDING MACHINE M1463
Available on backorder
1.The left and right guide rail adopts P-V structure, which is scraped by high precision manual, sothat the whole system products have high precision and high stability. 2.The front and rear feed guide rail of grinding wheel can choose roller and wire rail structure 3.Classic control mechanism, simple, safe and reliable. 4.M1350, M1450, M1363 series worktable and grinding wheel guide rail adopts high stablehydrostatic guide rail, high rigid dynamic and static pressure spindle. 5.Universal workhead can be adjusted at any Angle within 90 degrees counterclockwise to adapt tochuck grinding internal and external conical workpiece. |
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts