Filter
Sort:
Show:
BT shell mill arbors
Compare

BT shell mill arbors

Available on backorder
Main features：
  1. High quality elastic steel material with long use time.
  2. Type: A AD AD/B
  3. Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
  4. Suitable Facing Cutter:13mm-50mm
  5. The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
  6. Holder hardness:48-55HRC
  7. Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Compare

BT drill chuck arbors

Available on backorder
Main features: 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.  
Add to Wishlist
Add to Wishlist
BT End mill adapters
Compare

BT End mill adapters

Available on backorder
Main features： 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Compare

BT morse taper with tang

Available on backorder
Main features：   1, The material: Allyed case hardened steel, black-finished and precisely grinded 2, The precision: 0.005mm 3, The hardness: 52-58HRC 4, Surface: black, sand-blasting 5, Taper tolerance: AT3 6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Compare

BT milling chuck arbors

Available on backorder
Main features： 1.material:20CrMnTi 2.Comprehensive Accuracy:0.005mm 3.hardness:HRC56°-60°,carbon depth>0.8mm 4.Balanced G6.3/12000rpm,G2.5/20000rpm available 5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Compare

HSK ER collect chuck

Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Compare

HSK end mill holder

Available on backorder
Main features： 1.The material: Allyed case hardened steel, black-finished and precisely grinded 2.Taper tolerance: AT3 Standard 3.Hardness: 50-55HRC 4.Run out: 0.005mm 5.Coolant: AD, ADB, B type 6.Surface: blacken, sand blasting, plating 7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Compare

HSK shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Compare

HSK combi-shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
M7130A,M7130B,M7130C,M7132
Compare

M7130A,M7130B,M7130C,M7132

Available on backorder

Wheel Head Moving Surface Grinding Machine M7130A,M7130B,M7130C,M7132
Main features: 1.Wheel Head moving, Horizontal spindle,  suitable for heavy-duty cutting 2.Grind wheel head spindle front end adopts shell bear bearing support, rear end adopts Roller bearing, with high rigidity,specially for heavy-duty cutting. 3.Transmission: Worktable adopts one flat andone V guide ways, driven by hydraulic with smooth movement. 4.Grinding wheel adopts two sets of guideway, one is flat guide way for up/down moving. 5.Another set is swallow tail guide way forback-forward movements, with manual feeding or Auto-feedingby hydraulic cylinder. 6.The M7130AL,M7140A,M7150A,M7163 series surface grinder adopts the cooler for hydraulic oil tank. The temperature of the oil tank raises little so the thermal distortion of the machine is small. 7. Full lubrication system ensuring all guide ways smooth moving.
Add to Wishlist
Add to Wishlist
M7140A,M7130A
Compare

M7140A,M7130A

Available on backorder

Wheel Head Moving Surface Grinding Machine M7140A,M7130A
Main features: 1.Wheel Head moving, Horizontal spindle,  suitable for heavy-duty cutting 2.Grind wheel head spindle frontend adopts shell bear bearing support, rear end adopts Roller bearing, with high rigidity, specially for heavy-duty cutting. 3.Transmission: Worktable adopts one flat and one V  guide ways, driven by hydraulic with smooth movement. 4.Grinding wheel adopts two setsof guide way, one is flat guide way for up/down moving. 5.Another set isswallow tail guide way for back-forward movements, with manual feeding or Auto-feeding byhydraulic cylinder. 6.The M7130AL,M7140A,M7150A,M7163 series surface grinder adopts the cooler for hydraulic oil tank. The temperature of the oil tank raises little so the thermal distortion of the machine is small. 7.Full lubrication system ensuring all guide ways smooth moving.
Add to Wishlist
Add to Wishlist
M7180
Compare

M7180

Available on backorder

Wheel Head Moving Surface Grinding Machine M7180
Main features: 1. BallLead screw used for forward and back feeding., also worktable 2. Table with Turcite “B” for longer time life. 3. Bigbore oil cylinder adopted for better processing ability. 4. Wheel Head moving type. 5.Individual hydraulic station design. 6. Coolant and complete lubrication available
Add to Wishlist
Add to Wishlist
M7150A,M7163
Compare

M7150A,M7163

Available on backorder

Wheel Head Moving Surface Grinding Machine M7150A,M7163
Main features: 1. Ball Lead screw used for forward and back feeding.,also worktable 2. Table with Turcite “B” for longer time life. 3. Big bore oil cylinder adopted for better processingability. 4. Wheel Head moving type. 5. Individual hydraulic station design. 6. Coolant and complete lubricationavailable
Add to Wishlist
Add to Wishlist
MJ7115
Compare

MJ7115

Available on backorder

Manual Surface Grinding Machine MJ7115
Features: 1. Surface grinding is designed to grind various horizontal and vertical surfaces of the workpieces and endfaces of the grinding wheel. 2. It can also grind various contoured workpieces with shaped wheel or crafts manship apparatus. 3. Integrated grinding head of high quality, high rigidity and accuracy. 4. Small size, light weight,easy operation & maintenance. 5. Centralized lubrication for oil pump. 6. Super slide table 7.Enclosed cabinet style stand 8.Swarf guard 9.One shot lubrication 10.Diamond wheel dresser with holder 11.Tool Box 12.Wheel balancing kit 13.Single phase 3450 RPM motor
Add to Wishlist
Add to Wishlist
M618A,M820
Compare

M618A,M820

Available on backorder

Manual Surface Grinding Machine M618A,M820
Mainfeatures: 1.Quality castings and Precision ball bearing supporting thespindle 2.Coolant system with nozzle and flow control valve 3.Cast iron machine body and stand for maximum rigidity andsmooth operation 4.The machine can grind all kinds of surfaces or grind complex surfaces by dressing of grinding wheel. 5.The machineis suitable for grinding without auto feed and is installed with permanentmagnetic chuck or electromagnetic chuck according to customer’s requirement. 6.Vertical dial graduations 0.01mm,Cross travel graduations 0.02mm 7.Manual one shot lubrication pump 8.Wheel balancing stand and arbor 9.Halogen work light
Add to Wishlist
Add to Wishlist
Dial Test indicators DTI411-0.8A
Compare

Dial Test indicators DTI411-0.8A

Available on backorder
Features 1.High quality brass main body  High resistance to magnetism 2.Jeweled , vibration proof, durbi 3.Pivot ball bearing 4.Carbide, jewel ball or steel 5.Three dovetails
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status