Filter
Sort:
Show:
Clamping Kit 58pcs M8,M10,M12,M14,M16,M18,M20,M22
Compare

Clamping Kit 58pcs M8,M10,M12,M14,M16,M18,M20,M22

Available on backorder
Main Features:

  1.58 piece clamp kit 2.Material  :Heat treated 45# steel black oxide finish 3.Hardness:studs 25°,nut and step clamps step block 35-38° 4.Usage:Applyfor fixing each kind of working-piece on machining  table. 5.Threads reach to 6H standards 6.Triangle block from material of 45# steel 7.Basket material from of Plastic-steel For(M8—M12) Basket material from of iron for M14, M16 8.Set in plastic rack or wooden plateconsists of: 24pcs studs（75、100、125、150、175、200mm） 6pcs T-nuts,4pcs coupling nuts 6pcs flange nuts 6pcs step clamps 6pcs step blocks

Add to Wishlist
Add to Wishlist
BT shell mill arbors
Compare

BT shell mill arbors

Available on backorder
Main features：
  1. High quality elastic steel material with long use time.
  2. Type: A AD AD/B
  3. Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
  4. Suitable Facing Cutter:13mm-50mm
  5. The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
  6. Holder hardness:48-55HRC
  7. Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Compare

BT drill chuck arbors

Available on backorder
Main features: 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.  
Add to Wishlist
Add to Wishlist
BT End mill adapters
Compare

BT End mill adapters

Available on backorder
Main features： 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Compare

BT morse taper with tang

Available on backorder
Main features：   1, The material: Allyed case hardened steel, black-finished and precisely grinded 2, The precision: 0.005mm 3, The hardness: 52-58HRC 4, Surface: black, sand-blasting 5, Taper tolerance: AT3 6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Compare

BT milling chuck arbors

Available on backorder
Main features： 1.material:20CrMnTi 2.Comprehensive Accuracy:0.005mm 3.hardness:HRC56°-60°,carbon depth>0.8mm 4.Balanced G6.3/12000rpm,G2.5/20000rpm available 5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Compare

HSK ER collect chuck

Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Compare

HSK end mill holder

Available on backorder
Main features： 1.The material: Allyed case hardened steel, black-finished and precisely grinded 2.Taper tolerance: AT3 Standard 3.Hardness: 50-55HRC 4.Run out: 0.005mm 5.Coolant: AD, ADB, B type 6.Surface: blacken, sand blasting, plating 7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Compare

HSK shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Compare

HSK combi-shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
W2.0X2040,W2.5X2040,W2.0X2540,W2.5X2540
Compare

W2.0X2040,W2.5X2040,W2.0X2540,W2.5X2540

Available on backorder
Features: 1. Hand brake with one wholeblade. 2. Includes floor stand. 3. Stop rod and counterweightassist. 4. With balanced hammer , itcan easy to operate and easy for folding.
Add to Wishlist
Add to Wishlist
W2.0X2040A,W2.5X2540A
Compare

W2.0X2040A,W2.5X2540A

Available on backorder
Features: 1. With segment bending bladefor the bending of box section. 2. Various widths segmentshiftable setup. 3. With balanced hammer , itcan easy to operate and easy for folding. 4. Have different models foroptional.
Add to Wishlist
Add to Wishlist
Pan & Box Brake W1.2X1010,W1.2X1300
Compare

Pan & Box Brake W1.2X1010,W1.2X1300

Available on backorder
Features: 1. The bending blade is a kind of folded box, featuring simplestructure and easy operation. 2. With segment bending blade for the bending of box section. 3. Various widths segment. 4. Its maximum bending thickness is 1.2 mm.
Add to Wishlist
Add to Wishlist
Pan & Box Brake W1.2X1040,W1.2X1060
Compare

Pan & Box Brake W1.2X1040,W1.2X1060

Available on backorder
Features: 1.The bending blade is a kind of folded box, featuring simplestructure and easy operation. 2.With segment bending blade for the bending of box section. 3.Various widths segment. 4.Its maximum bending thickness is 1.2 mm.
Add to Wishlist
Add to Wishlist
Pan & Box Brake W1.5X1050
Compare

Pan & Box Brake W1.5X1050

Available on backorder
Features: 1.Simple construction. 2.Easy for working. 3.Our pan and box brake Wserial is used for processing thin plates. 4.The bending blade is a kindof folded box, featuring simple structure and easy operation. 5.Its maximum bendingthickness is 1.5mm.
Add to Wishlist
Add to Wishlist
Pan & Box Brake W1.5X1050F
Compare

Pan & Box Brake W1.5X1050F

Available on backorder
Features: 1.Segmentbending bar for the bending of box. 2.Sectionwith various widths, glide position.
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status