Filter
Sort:
Show:
Vertical band sawing machine VS5430
Compare

Vertical band sawing machine VS5430

1 in stock
Main features: 1. 300 x 300mm (W x H) rectangularcapacity 2. Cutting speeds are infinitelyvariable 3. Adjustable blade guides top& bottom (tungsten tipped) 4. Top blade guide is adjustableby hand wheel 5. Blade tensioning via hand wheel 6. Robust steel frame and castiron table 7. Blade welding unit withannealing device, blade shear, & grinder fitted to front of machine forconvenient blade welding
Add to Wishlist
Add to Wishlist
Portable band sawing machine G5012W
Compare

Portable band sawing machine G5012W

1 in stock
Main features: 1.150X100mm (W x H) rectangular capacity 2.adjustable spring tension screw regulating cutting feed rate 3.Fully-adjustable blade roller for accurate and straight cutting 4.Adjustable length stop for repetition cutting 5.3-speed pulley drive system 6.Automatic electric cut-out switch 7.Vertical cutting table included 8.Portable - on wheels for site work 9.Cuts 0 to 45º degrees in mitre vice 10.Sealed worm and pinion gear box drive
Add to Wishlist
Add to Wishlist
Portable band sawing machine PS-100
Compare

Portable band sawing machine PS-100

1 in stock

Main features:

1.Angle cutting from 0° to 45°

2.easy to carry roany work sites.

3. an aluminum-casting structure, light weight and stability.

4. Electronic variable speed.

5.Worm gear box hashardened and ground gears

6.Quick-releasevise for fast job changes

7.Rotated from 0° to 45°. It is equipped with block feeder (with fixed sawing length).

8.Blade wheels have heavy-duty ball bearings

9.Magnetic safety switch

10.Automatic shut off

11.Adjustable blade guide system

Add to Wishlist
Add to Wishlist
Bead bending machine RM08
Compare

Bead bending machine RM08

Available on backorder
Features: 1. The Rotary machine, the same as the ordinary beading machine,is used for blank pressing, arc pressing and so on for various plates. 2. Rotary machine includes 6 sets standard rollers 3. can be forming different shapes to meet various processing demands. 4. Adjustable roll pressure by means of top mounted hand crank. 5. Can be used in both forward and reverse 6. Can be operated smooth, fast and precisely. 7. Table mount with clamp is standard
Add to Wishlist
Add to Wishlist
Bead bending machine TB-12
Compare

Bead bending machine TB-12

Available on backorder
Features: 1. The Bead bending machine makes swaged plate, connection andso on of circular pipes, which refer to crushing the thin plates into the ribsin certain  shapes. 2. The rigidity of the plates, pipes or metal components isstrengthened. 3. Heavy and solid cast iron construction 4. Special steel adjustable bottom spindle 5. Complete with stand 4 sets standard rollers
Add to Wishlist
Add to Wishlist
Bead bending machine ETB-12
Compare

Bead bending machine ETB-12

Available on backorder
Features: 1. The Bead bending machine makes swaged plate, connection andso on of circular pipes, which refer to crushing the thin plates into the ribsin certain shapes. 2. The rigidity of the plates, pipes or metal components isstrengthened. 3. Heavy and solid cast iron construction 4. Special steel adjustable bottom spindle 5. Complete with stand 4 sets standard rollers 6. Self-braking motor with subframe (E-type model ETB-12) 7. Easy to operate with foot pedal control (E-type model ETB-12)
Add to Wishlist
Add to Wishlist
Bead bending machine ETB-25,40
Compare

Bead bending machine ETB-25,40

Available on backorder
Features: 1. The Bead bending machinemakes swaged plate, connection and so on of circular pipes, which refer tocrushing the thin plates into the ribs in certain shapes. 2. The rigidity of the plates,pipes or metal components is strengthened. 3. Steel welded constructionframe 4. Adjustable idle roller 5. Steel shaft with bronzebushings 6. Reduction motor with brakesystem 7. Movement of rollers withfoot pedal 8. Complete with stand 9. 4 sets standard rollers
Add to Wishlist
Add to Wishlist
Bead bending machine RM-A,RM-B
Compare

Bead bending machine RM-A,RM-B

Available on backorder
Features: 1. Hardened steel rollers 2. Head rotates 360 degree 3. Can bench mounded with “EZ Edge Finder” 4. Main technical parameter
Add to Wishlist
Add to Wishlist
2M9120A
Compare

2M9120A

Available on backorder

Multi Grinder 2M9120A
Features： 1.The functionality of the Multi-Grindranges from external and internal cylindrical grinding to taper grinding. 2.The Multi-Grind also allows easy toolgrinding (sharpening of cutters, reamers and turning tools) and is suitable forlight surface grinding job. 3.Three-Point Bearing The customthree-point bearing of the grinding spindle ensures minimum temperature effectsand consistent grinding quality. 4.Feed Drives Hydraulic table feed(longitudinal) with automatic change of direction. 5.An additional manually operatedlongitudinal feed with hydraulic support allows feed speeds up to 7 m/min. 6.Grinding Headstock Special grindingheadstock design allows simultaneous setup of 2 different grinding wheels. 7.The grinding headstock can be moved intransverse direction and also vertically; and it can be rotated around thevertical axis. 8.Speeds The headstock operates at 3 differentspeeds (110, 200, 300 min-1), which are set through an easy to operate gearshift lever. 9.central lubrication system - sturdyconstruction 10.minimizes vibration effects - electricalcomponents are mounted easily accessible in a control cabinet
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status