Shop – Prestige Machinery

Filter

Showing 1–16 of 17 resultsSorted by latest

Sort:

Show:

Clear filters

Compare

Band sawing machine G5012WA

1 in stock

Main Features:

1.Vice adjustable for mitre cutting (90° to45°)

2.Cutting pressure adjustable to each workpiece

3.V-belt allows 3 speed settings

4.Vertical useable for cutting of sheet metal

5.Cast iron saw frame guarantee svibration-free running

6.Includes material fence for efficient work

7.Carriage and transport handle for high mobility

8.Automatic shut-down at cutting end

9. Adjustable length stop for repetition cutting

10.45º swivel head for easy angle cutting without moving the material

11.Adjustable spring tension screw regulating cutting feed rate

12.Fully-adjustable blade roller for accurateand straight cutting

13.Vertical cutting table included

14.Sealed worm and pinion gear box drive

Add to Wishlist

Compare

Features: 1.Viceadjustable for mitre cutting (90° to 45°) 2.Cuttingpressure adjustable to each workpiece 3.V-beltallows 4 speed settings 4.Verticaluseable for cutting of sheet metal 5.Castiron saw frame guarantees vibration-free running 6.Includesmaterial fence for efficient work 7.Carriageand transport handle for high mobility 8. Automatic cut-off switch 9.Four wheels for easy machine moving. 10.45ºswivel head for easy angle cutting without moving the material 11.Adjustablespring tension screw regulating cutting feed rate 12.Fully-adjustableblade roller for accurate and straight cutting 13. Coolant pump for blade cooling. 14.Sealedworm and pinion gearbox drive

Add to Wishlist

Compare

Band sawing machine MS-250B

1 in stock

Main Features:

1.Centralizedcontrol panel on top of saw bow

2.One-piece saw bow

3.Deluxe bladetension hand wheel

4.Deluxe Tru-lockvise system with absolute clamping force

5.Easy speedchanges

6.Heavy-duty allsteel, one piece base

7.Adjustable hydraulic down feed; just dial your feed rate on the control panel

8.Worm gear box has hardened and ground gears

9.Quick-releasevise for fast job changes

10.Miter cuttingability

11.Blade wheelshave heavy-duty ball bearings

12.Magnetic safety switch

13.Automatic shut off

14.Adjustable blade guide system

Add to Wishlist

Compare

Band sawing machine MS-712

1 in stock

Add to Wishlist

Compare

Band sawing machine MS-912

1 in stock

Notice: BS-916V 1) BS916V is infinitely adjustable blade speed through PIV transmission 2) Featured in variable speed BS-916VR 1) BS916VR is infinitelyadjustable blade speed through PIV transmission 2) Featured in variable speed 3) Special for swiveling arm

Model		BS-916VR	BS-916V
Capicity	Circular @90°	229mm(9")	229mm(9")
	Rectangular @90 °	127x405mm(5"x16")	127x405mm(5"x16")
	Circular @45°	150mm(6")	150mm(6")
	Rectangular @45 °	150x190mm(6"x7.5")	150x190mm(6"x7.5")
Blade speed	@ 60HZ	22-122MPM 95-402FPM	22-122MPM 95-402FPM
Blade speed	@ 50HZ	18-102MPM 78-335 FPM	18-102MPM 78-335 FPM
Blade size(MM)		27x0.9x3215	27x0.9x2655
Motor power		1.5kW 2HP (3PH)
Dirve		V-belt
Packing size(cm)		188x78x134	180x77x114
N.W./G.W.(kg)		320/380	300/360

Add to Wishlist

Compare

Band sawing machine MS-916

1 in stock

Model		BS-916VR	BS-916V
Capicity	Circular @90°	229mm(9")	229mm(9")
	Rectangular @90 °	127x405mm(5"x16")	127x405mm(5"x16")
	Circular @45°	150mm(6")	150mm(6")
	Rectangular @45 °	150x190mm(6"x7.5")	150x190mm(6"x7.5")
Blade speed	@ 60HZ	22-122MPM 95-402FPM	22-122MPM 95-402FPM
Blade speed	@ 50HZ	18-102MPM 78-335 FPM	18-102MPM 78-335 FPM
Blade size(MM)		27x0.9x3215	27x0.9x2655
Motor power		1.5kW 2HP (3PH)
Dirve		V-belt
Packing size(cm)		188x78x134	180x77x114
N.W./G.W.(kg)		320/380	300/360

Add to Wishlist

Compare

Band sawing machine S-128DR,S-128HDR

1 in stock

Main features:

1. The maximum processing capacity is 128 mm (5”). 2. Light-weight design, easy to carry to any work sites 3. Down feed system design and swiveling work show 4. This band saw features a belt drive and 3-speed conversion. 5. The falling speed of saw bow is controlled by hydraulic cylinder and the saw bow can rotate from -45° to +60° 6. It features quick and fixed clamping 7. Has rollers on bottom of stand, can be moved freely 8. With a sizing device (machine will stop automatically after sawing materials) 9. It is equipped with a block feeder (with fixed sawing length) 10. Main technical parameter

Add to Wishlist

Compare

Band sawing machine MS-250R

1 in stock

Main Features: 1. The maximum processing capability of BAND SAW BS-1018 is 10"(254mm) 2. High-capacity due to controlled by motor 3. Can rotate from0° to 45° 4. has the advantage of quickly clamping. 5. features a belt driven and has four cutting speed. 6. The falling speed of saw bow is controlled by hydraulic cylinder 7. With a sizing device, machine will stop automatically after sawing materials 8. With power break protection device, machine will power off automatically when the rear protective cover is opened 9. With coolant system, can prolong the service life of saw blade and improve the precision of work piece 10. has a block feeder (with fixed sawing length) 11 .Main technical parameter

Add to Wishlist

Compare

Band Sawing Machine BS-180G

1 in stock

Features: 1. The BS-180G is one of the most versatile horizontal bandsaws on the market. 2. Design withheavy duty cast iron swivel head to do its mitering instead of the vise. 3. The BS-180G horizontal bandsaw is powered by 110 volts, allowing it to be used just aboutanywhere. . 4. Can be run in the traditional horizontal position for generalcut offs or in a vertical position. 5. In the horizontal position, it has a 7” OD round and a 7’ x10-1/4” rectangle capacity. 6. It is built from the highest quality components. 7. The head and bow are made from heavy duty cast iron that hasbeen precisely machined to exacting tolerances top. 8. A pair ofadjustable guides attached to the heavy duty head along with eight sealed ballbearings to help align the blade, help increase the life of the blade. 9. A chip removal brush and a flood coolant system isalso inclued with the BS-712MS manual band saw to complete this great package. 10. Easy adjustments forangle cuts. 11.Quick adjusting visefor angular cuts

Add to Wishlist

Compare

Hand-held power threader PT30-2B

Available on backorder

Add to Wishlist

Compare

Diamond core drill CD-130-350

Available on backorder

Main features: 1. Universal drive machine for dry& wet drilling 2. Versatile and efficient,drilling in steel-reinforced concrete, masonry and other materials 3. For pipeline and cable ducting,ventilation channels, test core drilling 4. All high diamond drill bits are laser welded for superior strength 3 times stronger than conventional brased bits 5. Heavy-duty, multi-purpose bits for drilling in many types of materials including reinforced concrete, cinderblock, stone, tec.

Add to Wishlist

Compare

Roll groover YG12A,YG12C

Available on backorder

Add to Wishlist

Compare

Pipe threading machine R2,R4,R6

Available on backorder

Features 1. Machine maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. 2. A large chip tray and oil reservoir makes machine ideal for longer uninterrupted threading. 3. Features a high clearance carriage making the threading operation easier and a generous top cover area that is ideal for keeping tools and work related materials handy. 4. Machine is equipped with a powerful 750W INDUCTION MOTOR which enable the machine process standard threads more quickly . 5. GEAR BOX DRIVING. 6. Compact design with cast aluminum body. Easy and fast transport and set-up. 7. Universal applicable, can also work on workbench. 8. CE APPROVED. 9. POWDER COATING, instead of traditional painting, healthy, environmental friendly. 10. Automatic DIE HEAD, 2 heads equipped. 11. Standard die is 9CrSi, HSS or 9Cr2 optional. 12. Constant oil flow, through the die head, with an integral oil reservoir. 13. Threader Stands and FOOT SWITCH are optional (extra charge).

Add to Wishlist

Compare

Pipe threading machine TC50D,TC100F

Available on backorder

Main features: 1. Compact design for easytransportation 2. Versatile design, can be usedas a power drive for many jobs, such as pipe grooving 3. All size of threads getprocessed only in one turn 4. Reliable and proven forconstant professional use 5. Ideal for stationary threadingin workshop, on building sites, for production, repair and service. 6. 3 shifts of speed, enables themachine always working within optimized load 7. Induction motor together withgear box + belt, effecientily control the noise level

Add to Wishlist