0
0 items
KSh0.00
No products in the cart.
Boring heads type F1
Available on backorder
Main Features：
1.Material:spring steel
2.Can supply all kinds of shanks to suitalbe for F1 boring head
3.Combine set including boring head,boring shank and boring bars
Add to Wishlist
Add to Wishlist
Carbide tipped boring bars
Available on backorder
Main Features：
1. Tool life is extended because each bar has far more steel behindthe cutting edge for heavier chatter free cut.
2. Deeper bore and more precise work.
3. The same bar can bore flat bottom hole or face.
4. Grind bar on cutting end for special tools such as grooving,threading, or automatic operations.
Add to Wishlist
Add to Wishlist
Boring shank F1 type
Available on backorder
Main Features:
1. All shanks are made of special heat treated alloy steel
2. F1 Boring shank standard:BT,MT,Din69871,CT
3. 12 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals
4. All shanks are held to 0.0000-0.0005" from the nominal diameter
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Available on backorder
Main features:
1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined
plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system.
3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting,
the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed,
starting and stopping the machine
Add to Wishlist
Add to Wishlist
cut off machine TV300,TV500
1 in stock
Features:
1.Can rapidly fasten the working platform
2.Vice complete with anti-burr device
3.Abrasive cutting tool
4.The grinding wheel cut-off machine is mainly used in architecture, metal, petrochemical, machine metallurgy and water and electricity installation, etc
5.Can be swiveled ±45°
6.Features quick cutting speed and high work efficiency.
7.It is suitable for cut-off the round, special pipe and all kinds of angle steel and flat steel.
8.The 24V low-voltage controlled hand switch is convenient for operation.
9.The safety hood of saw blade opens or closes according to the cutting needs, making it safety.
Add to Wishlist
Add to Wishlist
Circular Cut Saw Machine CG315,CG350
1 in stock
Features:
1.Double vice with material fence, formitre cutting up to 45°.
2.Ideal for cutting of steel, light metalsand plastics.
3.Sawblade cover according to CE, closesautomatically when lifting the saw arm.
4.Ergonomic control handle with 24 V safetyswitch.
5.Precise cutting results due to thespecial vice which clamps workpiece on the right and left side of the sawblade.
6.Serially equipped with TiN-coatedsawblade.
7.Low speed range of the sawblade is idealfor cutting of stainless steel.
8.Hardened and ground gears in oil bath.
9.Coolant device is positioned inside themachine frame, requiring minimum space.
Add to Wishlist
Add to Wishlist
Cut-off machine JG-400C
1 in stock
Features:
1.Big cutting capacity.
2.The blade spins smoothly.
3.Belt driven.
Add to Wishlist
Add to Wishlist
Cut-off Saw Machine JG400Q,JG400Z
1 in stock
MainFeatures
1. Solid structure
2. Lower vibration, lower noise
3. Precise Beveling angels
4. Heavy-dtuy type
5. Cutting section smooth.
6. 220V/ single phase and 3 Phase areavailable.
Add to Wishlist
Add to Wishlist
Circular Cut Saw Machine JG250F,JG315F
1 in stock
Features:
1.Movable head 45 left - 45 right
2.Reduction unit in oil bath
3.Double hinged pin with eccentric bush
4.Jet separation system to keep the bladelubricated
5.Bar support arm
6.Bar stop
7.Service tools
8.Instruction manual and spare parts
9.24V low voltage installation withhold-to-run control lever
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Available on backorder
Main features:
1. Induction hardened, precision ground V-way bed.
2. D1-4 spindleis supported by high quality tapered roller bearing.
3. Hardened,precision ground gears in headstock.
4. High precision directly mounting chuck.
5. Carriage mounted spindle control lever.
6. Automatic feed and threading are fully interlocked.
7. Tailstock maybe offset for turning tapers.
8. One-piece casting iron base allows heavy cuts.
9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Available on backorder
Main features:
1.2 Axis digital readout system
2.Quick change toolpost with 5 holders
3.Concertina leadscrew cover
4.Gear drive headstock for quick change of spindle speeds
5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting
6.Foot operated spindle brake with safety cut out switch
7.Change gears for metric and imperial thread cutting
8.Adjustable taper roller bearings support the spindle
9.Inching button is incorporated on the control panel for convenient spindle speed selection
10.Enclosed quick action gearbox for thread cutting and auto feeding
11.Powered longitudinal and cross feeds
12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Available on backorder
Main features:
1. Gear drive headstock for quick change of spindle speeds
2. Cast iron stand increasing rigidity and reducing vibration
3. Precision V-beds are hardened and ground, incorporating a rigid webbed casting
4. Low voltage work light
5. Foot operated spindle brake with safety cut out switch
6. Slide out front swarf tray for easy cleaning
7. Change gears for metric and imperial thread cutting
8. Oil sight glass for head stock and gearbox
9. Adjustable taper roller bearings support the spindle
10. Overload clutch mechanism on auto power feed
11. Micro-adjustable length-stop onbed-way for accurate repetitive operation
12. 3.2HP/415V motor 16-speed(50-2000rpm)
13. Inching button is incorporated on the control panel for convenient spindle speed selection
14. Enclosed quick action gearbox for thread cutting and auto feeding
15. Powered longitudinal and cross feeds
16. D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
17. Removable gap bed-way for larger diameter jobs
18. Dual calibrated dials (except for saddle hand-wheel)
19. Chuck & change gear guards are fitted with micro switches
20. Coolant system with flexible hose
21. Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Available on backorder
Main features:
1. Very rigid machine bed withheavy ribbing
2. Wide V-guide,induction-hardened and precision-ground
3. Maximum accuracy and quietoperation even at high speeds
4. High machining performance withheavy-duty powerful main drive
5. Infinitely variable slip clutchallows working with stops
6. Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches
7. Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302
8. Removable gap bridge formachining of large diameter parts
9. Large spindle Capacity diameter80 mm for machining of long parts
10. To ensure maximum accuracy andsmooth operation at high speeds
11. The main spindle is dynamicallybalanced and supported by adjustable precision bearing
12. Camlock ASA D1-8 mount accordto DIN 55029
13. Centre lubrication pump for CAMbox and box way
14. Includes Time-Saving FootBrakes
15. Pull-out Chip Tray
16. Headstock gears run in an oilbath
17. Micrometer Stop
18. Full length splash guard
19. Foot brake
20. Coolant system
21. Halogen work lamp
22. Jog button and emergency stop
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine C6246
Available on backorder
Features
1.2axis digital readout system
2.Quickchange tool post
3.Triplebearings supporting headstock spindle
4.Adjustabletaper roller bearings providing spindle accuracy
5.PrecisionV-beds & headstock gears are all hardened & ground
6.Onepiece cast iron base increases rigidity
7.Overloadprotection on drive motor and coolant system
8.Universalenclosed gearbox incorporating metric & imperial thread capabilities
9.Inchingbutton incorporated on the control panel for convenient spindle speed selection
10.Footoperated spindle brake with safety cut out switch
11.300mmwide induction hardened heavy duty cast iron bed
12.Removablegap bed allowing work piece to swing up to 640mm
13.Chuckguard fitted with safety micro switch
14.Poweredlongitudinal and cross feeds
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CD6241
Available on backorder
Features:
1)One piece cast iron stand
2)Infinitely variable spindle speed
3)1500mm D.B.C available
4)Precision ground and hardened V-way bed
5)Totally enclosed universal gearbox allows cutting of inch,metric,whitworth,modular and diametrical threads
6)Headstock gears run in an oil bath and are hardened and precision ground for smooth,quiet and vibration free operation
Add to Wishlist
Add to Wishlist
Gap bed lathe machine C0632A
Available on backorder
Features
1.recision ground and supersonic frequency hardened bed ways
2.The spindle is supported with precision roller bearings
3.Headstock gears are made of high quality steel, ground and hardened
4.Spindle speed range 70-2000RPM
5.Sealed and easy operating feed box has various feeds and thread cutting functions
6. Coolant system
7.Apron-mounted spindle ON/OFF lever
8.Removablechip tray
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
