0
0 items
KSh0.00
No products in the cart.
Adjustable angle Plate VP-180,VP-250,VP-380,VP-600
Available on backorder
Main features:
1. The adjusting table is of the main accessory that be used on miller, sawdriller,reamer,sharpener etc.
2. It can help the machine to finish the work of angling hole,slot surface,mitre etc and more than all.
3. 45 degree adjustable to both sides.
4. Heavy duty andsturdy construction.
5. Machined1/2" table slots.
6. Crank handle for easy and precise adjustment.
Add to Wishlist
Add to Wishlist
Electric hoist and geared trolley
1 in stock
Main features:
1. Third-class dead axel helical gear transmission structure is adopted
2. Gear and gear axel are made of heat treated alloy steel
3. Case and case cover with precise assembly and good seal are made of quality cast iron
4. The reducer is independent, soits easy to load and unload
5. It has deice with up and down stroke protection of break off limiter and can cut off main circult in an emergency
6. Electric elements are of long service life and operational safety
7. It uses GB1102-74 hoist steel wire rope which is durable in use
8. The hoist motor uses conical rotors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester
9. The motor’s load duration factor is 25%and motor uses B grade and F grade insulation and its grade of protection is IP44/IP54
Add to Wishlist
Add to Wishlist
Wire rope hoist and plain trolley
Available on backorder
Main features:
1. Third-class dead axel helicalgear transmission structure is adopted
2. Gear and gear axel are made of eat treated alloy steel
3. Case and case cover with precise assembly and good seal are made of quality cast iron
4. The reducer is independent, soits easy to load and unload
5. It has deice with up and down stroke protection of break off limiter and can cut off main circult in anemergency
6. Electric elements are of long service life and operational safety
7. It uses GB1102-74 hoist steel wire rope which is durable in use
8. The hoist motor uses conicalrotors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester
9. The motor’s load duration factor is 25%and motor uses B grade and F grade insulation and its grade of protection is IP44/IP54
Add to Wishlist
Add to Wishlist
Low position transmission jack TL07 series
Available on backorder
Main features:
1. Includes 360° swivel handle foruse in the most restricted working areas
2. Universal mounting headprovides a wide tilt range
3. Included safety chains make iteasy to secure the transmission to the jack
4. Low profile design with 4heavy-duty steel swivel casters for easy positioning and effortless maneuveringthroughout the shop
5. Wide base provides exceptionalstability
6. Constructed with a heavy dutysteel frame
7. Extra-long handle included foreasy pumping force
8. Integrated overload protectionvalve keeps from overloading the system
9. Spring return ram speeds upyour work
10. High quality large diameterhydraulic steel cylinder unit results in lower oil pressure needed to raise theload, helping to reduce wear and extend service life
11. Polished inner cylinder wallsextend the life of the hydraulic seals to minimize abrasion and wear
12. The cylinder ram and pistonsare polished and chromed
13. Guided by high performanceseals, wear rings and dust seals
Add to Wishlist
Add to Wishlist
Folding type crane C-0.5,1.2.3
Available on backorder
Main features:
1. This powerful shop cranedelivers the lifting power you need with the added advantage of compactstorage!
2. The crane includes a ram, chainand clevis grab hook with safety latch.
3. Double ball bearing with swivelcasters allow for easy positioning and maneuverability around your work space.
Add to Wishlist
Add to Wishlist
Lifting crane SP02201,SP02301
Available on backorder
Main features:
1. This powerful shop crane delivers the lifting power you need with the added advantage of compactstorage!
2. The crane includes a ram, chainand clevis grab hook with safety latch.
3. Double ball bearing with swivel casters allow for easy positioning and maneuverability around your work space.
Add to Wishlist
Add to Wishlist
Electric Stacker CDD10B,CDD15B.CTD10B,CTD15B
Available on backorder
Features:
1.Compact design with strong European steel construction.
2.Simple and convenient lifting operating system.
3.Light and easy manual steering system,equipped with a parking brake.
4.Smooth control of precise lifting and lowering.
5.Special design are available according to customers’ requirements.
Remark: CDDseries are with fixed legs & fixed forks.CTDseries are with straddle legs & adjustable forks.
Add to Wishlist
Add to Wishlist
Electric Stacker CDD10B-III,CDD15B-III,CTD10B-III,CTD15B-III
Available on backorder
Features:
1.Handle-castor chain assist steering system greatly reduces the labor intensity.
2.Equipped with explosion-proof valve, against of sudden drop offorks and prevent operator from harm.
3.Over-discharge protection device greatly prolongs the battery use time.
4.Overall type adjustable forks,which can be lowered to thesame level of the legs.
5.Chain connect side wheel and handle, easy for steering.
6.Easy operating foot brake.
Add to Wishlist
Add to Wishlist
Heavy Duty Electric Stacker CDD20M
Available on backorder
Features:
SAFETYAND PRODUCTIVITY:
•Emergency reversing device.
•Built-in pressure relief valve protects the trucks from overloads.
•Emergency power disconnect.
• Lowspeed switch in the handle.
•Stepless speed control.
•Folding rubber platform & guards to keep safe & fatigue free.
STRUCTURAL:
• Theside located cyliders provides operators a wide view and ensures structuralstability.
•Spring-loaded castors improve lateral stability on uneven floors and enhancetruck performance and service life.
•Imported steel for the mast from Germany.
•Supporting legs.
SERVICEABILITY:
• Lowvoltage protection setting prolongs the battery use time.
• CANbustechnology reduces wiring complexity and increases reliability.
Remarks:
Heavyduty type Stacker, the full free lifting is only avaiable for lift from 4.5m to5.8m.
Add to Wishlist
Add to Wishlist
CNC Combination Tool Cart
Available on backorder
Features:
1.The stabile structure and special surface process ensure the tool cart could suit the hard working environment.
2.The top tool-holder panel can load 20 pcs tool holder.Suitable for BT30,BT40,BT50 etc…
3.The top drawer with the adjustable partition-board could divide the drawer inside space to load assorted tools separately.
4.There are two pieces shed panel with the tool-holder 14 pieces tool holders for each panel in the cabinet.
And it can be pulled out and push back, convenient to take the tool holder.
5.4 Inch iron foot wheel with brake can load 400kgs in total.
Add to Wishlist
Add to Wishlist
Two Side Tool Rack Holder
Available on backorder
Features:
1.Suitable for the tool holder BT30, BT40, BT50...
2.Two sides holder can hold more tools.
3.Customized production is available.
Add to Wishlist
Add to Wishlist
CNC Multi-purpose Tool Cart
Available on backorder
Features:
1.DYC-303-3A suitable for VMC storaging all kinds mill chucks, arbors etc...
2.Helping in extengding cuters life, assuring the acuracy of the cuters.
3.The top tool-holder panel can load 20 pcs tool holder.(suitable for BT30,BT40,BT50 etc…)
4.There are two pieces shed panel with the tool-holder 14 pieces tool holders for each panel in the cabinet.And it can be pulled out and push back, convenient to take the tool holder.
Add to Wishlist
Add to Wishlist
7 Drawers Maintaining Trolley
Available on backorder
Features:
1.With 7 pieces drawers.
2.The plastic top cover.
3.Ball bearing slides.
4.Pu castor.
5.Aluminium alloy handle.
Add to Wishlist
Add to Wishlist
5 Drawers Cabinet with wheels
Available on backorder
Features:
1. Max.load capacity: 300kgs
2. With 4” size 2 fixed wheels and 2 swivelwheels with brakes, all wheels are Polyurethanewheel.
3. The thickness of the body and drawers is1.0mm, the thickness of the 2 retractable shelves and shed panel is 1.5mm.
4. The top tool-holder panel can load 48 pieces BT30 tool holder/43 pieces BT40 tool holder/38 pieces BT50 tool holder.
5. The retractable shelves with 3mm thicknesssingle guide, drawers with 2mm thickness 3 sliderails.
6. OEM is available.
Add to Wishlist
Add to Wishlist
7 Drawers Tool Cabinet
Available on backorder
Features:
1. Cabinet with 7 drawers.
2. Material thickness 1.0mm and 1.2mm.
3. Drawers with 3 slide rails.
4. Size: W723*D572*H1100mm
5. OEM is available.
Add to Wishlist
Add to Wishlist
Two-function Tool cabinet
Available on backorder
Features:
1. Max.load capacity: 300kgs.
2. The thickness of the body is1.2mm.
3. The thickness of the 4 tool holder shed panel is 1.8mm.
4. The thickness of the door is 1.4mm.
5. The thickness of the left 4 adjustable shedpanel is 1.0mm.
6. The tool-holder panel can load 63 pieces BT30tool holder/56 pieces BT40 tool holder/33 pieces BT50 tool holder.
7. Size: W1000*D500*H1800mm
8. Carbon steel and Stainless steel can bechose.
9. OEM is available.
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts