Filter
Sort:
Show:
Electric hoist and geared trolley
Compare

Electric hoist and geared trolley

1 in stock
Main features: 1.   Third-class dead axel helical gear transmission structure is adopted 2.   Gear and gear axel are made of heat treated alloy steel 3.   Case and case cover with precise assembly and good seal are made of quality cast iron 4.   The reducer is independent, soits easy to load and unload 5.   It has deice with up and down stroke protection of break off limiter and can cut off main circult in an emergency 6.   Electric elements are of long service life and operational safety 7.   It uses GB1102-74 hoist steel wire rope which is durable in use 8.   The hoist motor uses conical rotors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester 9.   The motor’s load duration factor is 25%and motor uses B grade and F grade insulation and its grade of protection is IP44/IP54
Add to Wishlist
Add to Wishlist
Wire rope hoist and plain trolley
Compare

Wire rope hoist and plain trolley

Available on backorder
Main features: 1.   Third-class dead axel helicalgear transmission structure is adopted 2.   Gear and gear axel are made of eat treated alloy steel 3.   Case and case cover with precise assembly and good seal are made of quality cast iron 4.   The reducer is independent, soits easy to load and unload 5.   It has deice with up and down stroke protection of break off limiter and can cut off main circult in anemergency 6.   Electric elements are of long service life and operational safety 7.   It uses GB1102-74 hoist steel wire rope which is durable in use 8.   The hoist motor uses conicalrotors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester 9.   The motor’s load duration factor is 25%and motor uses B grade and F grade insulation and its grade of protection is IP44/IP54
Add to Wishlist
Add to Wishlist
Low position transmission jack TL07 series
Compare

Low position transmission jack TL07 series

Available on backorder
Main features: 1.    Includes 360° swivel handle foruse in the most restricted working areas 2.    Universal mounting headprovides a wide tilt range 3.    Included safety chains make iteasy to secure the transmission to the jack 4.    Low profile design with 4heavy-duty steel swivel casters for easy positioning and effortless maneuveringthroughout the shop 5.    Wide base provides exceptionalstability 6.    Constructed with a heavy dutysteel frame 7.    Extra-long handle included foreasy pumping force 8.    Integrated overload protectionvalve keeps from overloading the system 9.    Spring return ram speeds upyour work 10.  High quality large diameterhydraulic steel cylinder unit results in lower oil pressure needed to raise theload, helping to reduce wear and extend service life 11.  Polished inner cylinder wallsextend the life of the hydraulic seals to minimize abrasion and wear 12.  The cylinder ram and pistonsare polished and chromed 13.  Guided by high performanceseals, wear rings and dust seals
Add to Wishlist
Add to Wishlist
Folding type crane C-0.5,1.2.3
Compare

Folding type crane C-0.5,1.2.3

Available on backorder
Main features: 1.   This powerful shop cranedelivers the lifting power you need with the added advantage of compactstorage! 2.   The crane includes a ram, chainand clevis grab hook with safety latch. 3.   Double ball bearing with swivelcasters allow for easy positioning and maneuverability around your work space.
Add to Wishlist
Add to Wishlist
Lifting crane SP02201,SP02301
Compare

Lifting crane SP02201,SP02301

Available on backorder
Main features: 1. This powerful shop crane delivers the lifting power you need with the added advantage of compactstorage! 2. The crane includes a ram, chainand clevis grab hook with safety latch. 3. Double ball bearing with swivel casters allow for easy positioning and maneuverability around your work space.
Add to Wishlist
Add to Wishlist
Electric Stacker CDD10B,CDD15B.CTD10B,CTD15B
Compare

Electric Stacker CDD10B,CDD15B.CTD10B,CTD15B

Available on backorder
Features:  

1.Compact design with strong European steel construction.

2.Simple and convenient lifting operating system.

3.Light and easy manual steering system,equipped with a parking brake.

4.Smooth control of precise lifting and lowering.

5.Special design are available according to customers’ requirements.

Remark: CDDseries are with fixed legs & fixed forks.

CTDseries are with straddle legs & adjustable forks.

Add to Wishlist
Add to Wishlist
Electric Stacker CDD10B-III,CDD15B-III,CTD10B-III,CTD15B-III
Compare

Electric Stacker CDD10B-III,CDD15B-III,CTD10B-III,CTD15B-III

Available on backorder
Features: 1.Handle-castor chain assist steering system greatly reduces the labor intensity. 2.Equipped with explosion-proof valve, against of sudden drop offorks and prevent operator from harm. 3.Over-discharge protection device greatly prolongs the battery use time. 4.Overall type adjustable forks,which can be lowered to thesame level of the legs. 5.Chain connect side wheel and handle, easy for steering. 6.Easy operating foot brake.
Add to Wishlist
Add to Wishlist
Heavy Duty Electric Stacker CDD20M
Compare

Heavy Duty Electric Stacker CDD20M

Available on backorder
Features: SAFETYAND PRODUCTIVITY: •Emergency reversing device. •Built-in pressure relief valve protects the trucks from overloads. •Emergency power disconnect. • Lowspeed switch in the handle. •Stepless speed control. •Folding rubber platform & guards to keep safe & fatigue free.   STRUCTURAL: • Theside located cyliders provides operators a wide view and ensures structuralstability. •Spring-loaded castors improve lateral stability on uneven floors and enhancetruck performance and service life. •Imported steel for the mast from Germany. •Supporting legs.   SERVICEABILITY: • Lowvoltage protection setting prolongs the battery use time. • CANbustechnology reduces wiring complexity and increases reliability.   Remarks: Heavyduty type Stacker, the full free lifting is only avaiable for lift from 4.5m to5.8m.
Add to Wishlist
Add to Wishlist
Slotting head SLH-100,SLH-125
Compare

Slotting head SLH-100,SLH-125

Available on backorder
Main features: 1. The slotting head can be widelyused for slotting, pressing, etc. 2. It can made teeth, inner hexspindle with attachment and special tooling. 3. The reciprocal movement is penalizedby a pair of 6 step triangle pulley worm and worm gear through an eccentricrlock. 4. Dial on the slotting head isused to adjust travel of slotting tube. 5. 100 and 125mm, two slotting strokes. 6. Cast iron body and Aluminum head cover.
Add to Wishlist
Add to Wishlist
New Slotting machine SLM-100,SLM-120
Compare

New Slotting machine SLM-100,SLM-120

Available on backorder
Main features: 1.    Heavy duty cast ironconstruction 2.    Swivel head tilts left andright 90º 3.    Dovetail vertical Z-Axis 4.    0-100mm machining stroke range 5.    Strokes per minute 60-350 (6ranges) 6.    800 x 240mm table size 7.    230mm working table crosstravel 8.    560mm working tablelongitudinal travel 9.    Safety chuck guard with micro 10.  14mm T-Slot on table 11.  370W/1/2hp, 240V motor 12.  Includes steel fabricated stand 13.  Suits 16mm diameter tooling
Add to Wishlist
Add to Wishlist
Slotting machine B5020D,B5032D,B5050A,B5063
Compare

Slotting machine B5020D,B5032D,B5050A,B5063

Available on backorder
Main features: 1. This machine is used forslotting the flat and formed surface keyways, etc. 2. It is suitable for eithersingle piece of small batch production 3. The main transmission mechanismis used for converting the rotating motion of the crank gear into reciprocatingmotion of rain 4. The worktable Is designed forlongitudinal, cross and rotary feeding both automatically (only for D typemodel) and manually 5. The feed is stoppedautomatically, when the worktable is in case of trouble
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Compare

Gap bed lathe machine GH1440K

Available on backorder
Main features: 1. Induction hardened, precision ground V-way bed. 2. D1-4 spindleis supported by high quality tapered roller bearing. 3. Hardened,precision ground gears in headstock. 4. High precision directly mounting chuck. 5. Carriage mounted spindle control lever. 6. Automatic feed and threading are fully interlocked. 7. Tailstock maybe offset for turning tapers. 8. One-piece casting iron base allows heavy cuts. 9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Compare

Gap Bed Lathe Machine CQ6236

Available on backorder
Main features: 1.2 Axis digital readout system 2.Quick change toolpost with 5 holders 3.Concertina leadscrew cover 4.Gear drive headstock for quick change of spindle speeds 5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting 6.Foot operated spindle brake with safety cut out switch 7.Change gears for metric and imperial thread cutting 8.Adjustable taper roller bearings support the spindle 9.Inching button is incorporated on the control panel for convenient spindle speed selection 10.Enclosed quick action gearbox for thread cutting and auto feeding 11.Powered longitudinal and cross feeds 12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard 13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Compare

Gap bed lathe machine GH1440A

Available on backorder
Main features: 1.    Gear drive headstock for quick change of spindle speeds 2.    Cast iron stand increasing rigidity and reducing vibration 3.    Precision V-beds are hardened and ground, incorporating a rigid webbed casting 4.    Low voltage work light 5.    Foot operated spindle brake with safety cut out switch 6.    Slide out front swarf tray for easy cleaning 7.    Change gears for metric and imperial thread cutting 8.    Oil sight glass for head stock and gearbox 9.    Adjustable taper roller bearings support the spindle 10.  Overload clutch mechanism on auto power feed 11.  Micro-adjustable length-stop onbed-way for accurate repetitive operation 12.  3.2HP/415V motor 16-speed(50-2000rpm) 13.  Inching button is incorporated on the control panel for convenient spindle speed selection 14.  Enclosed quick action gearbox for thread cutting and auto feeding 15.  Powered longitudinal and cross feeds 16.  D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard 17.  Removable gap bed-way for larger diameter jobs 18.  Dual calibrated dials (except for saddle hand-wheel) 19.  Chuck & change gear guards are fitted with micro switches 20.  Coolant system with flexible hose 21.  Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Compare

Gap bed lathe machine CH series

Available on backorder
Main features: 1.    Very rigid machine bed withheavy ribbing 2.    Wide V-guide,induction-hardened and precision-ground 3.    Maximum accuracy and quietoperation even at high speeds 4.    High machining performance withheavy-duty powerful main drive 5.    Infinitely variable slip clutchallows working with stops 6.    Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches 7.    Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302 8.    Removable gap bridge formachining of large diameter parts 9.    Large spindle Capacity diameter80 mm for machining of long parts 10.  To ensure maximum accuracy andsmooth operation at high speeds 11.  The main spindle is dynamicallybalanced and supported by adjustable precision bearing 12.  Camlock ASA D1-8 mount accordto DIN 55029 13.  Centre lubrication pump for CAMbox and box way 14.  Includes Time-Saving FootBrakes 15.  Pull-out Chip Tray 16.  Headstock gears run in an oilbath 17.  Micrometer Stop 18.  Full length splash guard 19.  Foot brake 20.  Coolant system 21.  Halogen work lamp 22.  Jog button and emergency stop
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine C6246
Compare

Gap Bed Lathe Machine C6246

Available on backorder
Features 1.2axis digital readout system 2.Quickchange tool post 3.Triplebearings supporting headstock spindle 4.Adjustabletaper roller bearings providing spindle accuracy 5.PrecisionV-beds & headstock gears are all hardened & ground 6.Onepiece cast iron base increases rigidity 7.Overloadprotection on drive motor and coolant system 8.Universalenclosed gearbox incorporating metric & imperial thread capabilities 9.Inchingbutton incorporated on the control panel for convenient spindle speed selection 10.Footoperated spindle brake with safety cut out switch 11.300mmwide induction hardened heavy duty cast iron bed 12.Removablegap bed allowing work piece to swing up to 640mm 13.Chuckguard fitted with safety micro switch 14.Poweredlongitudinal and cross feeds
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status