Filter
Sort:
Show:
Mini Rotary table HV-3/4/5
Compare

Mini Rotary table HV-3/4/5

Available on backorder
Main features:   1. It is anadjustable height tailstock used when you need to support a long part held inthe rotary table- such ascutting a spline on a shaft. 2. Precisionmade of heavy cast iron, it has a basefor mounting tothe mill table with T- bolts. 3. Manufactured from Seasoned Grade Casting. 4. Adjustable toCenter Heights from 80 - 105mm
Add to Wishlist
Add to Wishlist
Rotary table HV-6,8,10,12,14,16
Compare

Rotary table HV-6,8,10,12,14,16

Available on backorder
Main features: 1. TSL vertical &horizontal rotary table is one of the main accessory of milling machine, it isused for index boring, milling, circle cutting, spot facing and boring hole etcon milling machine. 2.  Rotary table in verticalwith tailstock working together, it can used on complex work for circle indexboring and milling. 3. As clients’ specialrequirements the TSL with left handwheel can be offered.

4. A flange for connecting scroll chuck is special supplied,and be packedindependent.For special order,the dividing plates accessory allows the operatorto accurately divide the 360 degree rotation of the clamping surface intodivisions of 2 through 66,and all divisible of 2,3 and 5 from 67-132.

5.  Optional accessories: hole plate, flange, tailstock, center

Add to Wishlist
Add to Wishlist
Tilting rotary table TSK series
Compare

Tilting rotary table TSK series

Available on backorder
Main features: 1. The TSK series tiiting rotarytables are one of main accessories for milling, boring and drilling machines. 2. They can be used for machining,the oblique hole or surface and hole of compund angle at one set-up. 3. It is so designed as to be usedin a vertical position to carry out center work with a tailstock. 4. This table can be tilted to anyposition from 0 to 90 and locked. 5. Aflange for connecting scrollchuck is special supplied, and be packed independent. 6. For special order, the dividnigplates accessory allows the operator to accurately divide the 360 rotation ofthe clamping surface into dividions of 2 through 66, and all divisible of 2,3and 5 from 67-132.
Add to Wishlist
Add to Wishlist
DC inverter MMA welder
Compare

DC inverter MMA welder

Available on backorder
Main features: 1. Minimizing, lightness, highquality and energy-saving. 2. Good arc-starting and arcforce, it can resist disturbing stable arc and little spatter. 3. High welding quality, deeppenetration and strong strength. 4. Auto protection of over-voltageand over-current. 5. Be able to work continuously,it can balance automatically when voltage is waving. 6. Suit for welding all kinds ofbasic welding rod. 7. Be able to weld cellulose rod.
Add to Wishlist
Add to Wishlist
AC arc welder BX1,BX6
Compare

AC arc welder BX1,BX6

Available on backorder
Main features: 1. Single phase moving core typeand forced air cooling structure. 2. Suitable for welding ferrousmetal workpiece with general AC electrode. 3. Stable arc, less spatter anddeep penetration can ensure welding quality well. 4. Simple structure, high efficiency,easy to operate and maintenance.
Add to Wishlist
Add to Wishlist
DC inverter TIG welder
Compare

DC inverter TIG welder

Available on backorder
Main Features: 1. Advanced inverter technology, high working frequency, compact size andweight, easy to carry 2. Stable and reliable welding current. 3. Low No-load loss, low energy consumption 4. Applicable for welding of ferrous-metals, medium carbon steel and alloysteel,etc.
Add to Wishlist
Add to Wishlist
Welding machine MIG
Compare

Welding machine MIG

Available on backorder
Main features: 1. Single-phase,portable,fan-cooledwire welding machine for flux(no gas) and MIG/MAG(gas)welding 2. With thermal protection, complete with MIG welding accessories. 3. The kit for welding different types of materials such as steel,stainless steel. 4. Steel and aluminum is available on request.
Add to Wishlist
Add to Wishlist
Spot welder DN series Spot welder DN series
Compare

Spot welder DN series Spot welder DN series

Available on backorder
Main features: 1. Low power consumption of maintransformer 2. Water-cooling structure. 3. Easy operation and maintenancewith pedal-level type spring-press structure. 4. Adjustable welding time, easywelding repeated. 5. Suitable for low carbon steel,wire, stainless steel plate etc. 6. Widely used for welding mediumand low carbon steel plates, stainless steel material in industrial production
Add to Wishlist
Add to Wishlist
Plasma cutting CUT series
Compare

Plasma cutting CUT series

Available on backorder
Main features: 1. Cutting capacity increased 1.8times higher in cutting speed compare with flame cutter 2. Thick metal plate can be cuteasily and quickly. 3. Suitable for cutting stainlesssteel, copper, iron and aluminium metal etc. 4. Simple operation, smooth cuttingsurface. 5. Hf untouched Arc-startingcutting (70,100,120) 6.  Hf touched Arc-staring cutting(30,40,60).
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Compare

shaping machine BC6085,BC60100

Available on backorder
Main features: 1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined plane which enlarge its using scope. 2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system. 3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting, the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine. 4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump. 5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed, starting and stopping the machine
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Compare

Gap bed lathe machine GH1440K

Available on backorder
Main features: 1. Induction hardened, precision ground V-way bed. 2. D1-4 spindleis supported by high quality tapered roller bearing. 3. Hardened,precision ground gears in headstock. 4. High precision directly mounting chuck. 5. Carriage mounted spindle control lever. 6. Automatic feed and threading are fully interlocked. 7. Tailstock maybe offset for turning tapers. 8. One-piece casting iron base allows heavy cuts. 9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Compare

Gap Bed Lathe Machine CQ6236

Available on backorder
Main features: 1.2 Axis digital readout system 2.Quick change toolpost with 5 holders 3.Concertina leadscrew cover 4.Gear drive headstock for quick change of spindle speeds 5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting 6.Foot operated spindle brake with safety cut out switch 7.Change gears for metric and imperial thread cutting 8.Adjustable taper roller bearings support the spindle 9.Inching button is incorporated on the control panel for convenient spindle speed selection 10.Enclosed quick action gearbox for thread cutting and auto feeding 11.Powered longitudinal and cross feeds 12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard 13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Compare

Gap bed lathe machine GH1440A

Available on backorder
Main features: 1.    Gear drive headstock for quick change of spindle speeds 2.    Cast iron stand increasing rigidity and reducing vibration 3.    Precision V-beds are hardened and ground, incorporating a rigid webbed casting 4.    Low voltage work light 5.    Foot operated spindle brake with safety cut out switch 6.    Slide out front swarf tray for easy cleaning 7.    Change gears for metric and imperial thread cutting 8.    Oil sight glass for head stock and gearbox 9.    Adjustable taper roller bearings support the spindle 10.  Overload clutch mechanism on auto power feed 11.  Micro-adjustable length-stop onbed-way for accurate repetitive operation 12.  3.2HP/415V motor 16-speed(50-2000rpm) 13.  Inching button is incorporated on the control panel for convenient spindle speed selection 14.  Enclosed quick action gearbox for thread cutting and auto feeding 15.  Powered longitudinal and cross feeds 16.  D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard 17.  Removable gap bed-way for larger diameter jobs 18.  Dual calibrated dials (except for saddle hand-wheel) 19.  Chuck & change gear guards are fitted with micro switches 20.  Coolant system with flexible hose 21.  Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Compare

Gap bed lathe machine CH series

Available on backorder
Main features: 1.    Very rigid machine bed withheavy ribbing 2.    Wide V-guide,induction-hardened and precision-ground 3.    Maximum accuracy and quietoperation even at high speeds 4.    High machining performance withheavy-duty powerful main drive 5.    Infinitely variable slip clutchallows working with stops 6.    Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches 7.    Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302 8.    Removable gap bridge formachining of large diameter parts 9.    Large spindle Capacity diameter80 mm for machining of long parts 10.  To ensure maximum accuracy andsmooth operation at high speeds 11.  The main spindle is dynamicallybalanced and supported by adjustable precision bearing 12.  Camlock ASA D1-8 mount accordto DIN 55029 13.  Centre lubrication pump for CAMbox and box way 14.  Includes Time-Saving FootBrakes 15.  Pull-out Chip Tray 16.  Headstock gears run in an oilbath 17.  Micrometer Stop 18.  Full length splash guard 19.  Foot brake 20.  Coolant system 21.  Halogen work lamp 22.  Jog button and emergency stop
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine C6246
Compare

Gap Bed Lathe Machine C6246

Available on backorder
Features 1.2axis digital readout system 2.Quickchange tool post 3.Triplebearings supporting headstock spindle 4.Adjustabletaper roller bearings providing spindle accuracy 5.PrecisionV-beds & headstock gears are all hardened & ground 6.Onepiece cast iron base increases rigidity 7.Overloadprotection on drive motor and coolant system 8.Universalenclosed gearbox incorporating metric & imperial thread capabilities 9.Inchingbutton incorporated on the control panel for convenient spindle speed selection 10.Footoperated spindle brake with safety cut out switch 11.300mmwide induction hardened heavy duty cast iron bed 12.Removablegap bed allowing work piece to swing up to 640mm 13.Chuckguard fitted with safety micro switch 14.Poweredlongitudinal and cross feeds
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CD6241
Compare

Gap Bed Lathe Machine CD6241

Available on backorder
Features: 1)One piece cast iron stand 2)Infinitely variable spindle speed 3)1500mm D.B.C available 4)Precision ground and hardened V-way bed 5)Totally enclosed universal gearbox allows cutting of inch,metric,whitworth,modular and diametrical threads 6)Headstock gears run in an oil bath and are hardened and precision ground for smooth,quiet and vibration free operation
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status