Shop – Prestige Machinery

Filter

Showing 1–16 of 65 resultsSorted by latest

Sort:

Show:

Clear filters

Compare

F11,F12 series universal,semi-universal dividing head

Available on backorder

Main features: F11SERIES UNIVERSAL DIVIDING HEAD 1. The universal dividing head,Type F11100A,F11125,F11160A,F11200A is one of the most important attachment for milling machine. With the help of this dividing head the workpiece held between centers, or on a chuck can be rotate to any angle asesired and the periphery of a workpiece can be divided into any divisions of equal parts. By means of all kinds of cutters, the dividing head can also help milling machine to perform the milling operation for flute spur gear, spiral gear, spiral flute, Archimedean cam, helical flute and etc. 2. The dividing head, is equipped with a face plate that can be mounted onto the spindle nose. The workpiece canbe mounted on the face plate, thus, cutting can be carried out on 4-sides of a workpiece. 3. F11125C,F11160C is designed for the customers special needed, the shafting is improved to support heavy load. 4. The universal dividing head,type F11100AL, F11125AL, F11160AL is the same as of the structures and the operationhandle is setted on the left. F12SERIES SEMI-UNIVERSAL DIVIDING HEAD 1. Type F12 series semi-universal dividing head is one of the most important attachment for milling machine. It can be used for simple indexing and divide circle into any equal parts, etc. 2. The F12 series with right hand wheel.

Add to Wishlist

Compare

Diving head HF11260,HF11300,HF11400,HF12500,HF121000

Available on backorder

Add to Wishlist

Compare

SEMI-UNIVERSAL DIVIDING HEAD BS-0,BS-1

Available on backorder

Add to Wishlist

Compare

UNIVERSAL DIVIDING HEAD BS-2

Available on backorder

Add to Wishlist

Compare

SUPERIOR UNIVERSAL DIVIDING HEAD BS-3

Available on backorder

Main features: 1. The BS-3 is designed and madeaccording to characteristics and advantages to all kinds of divid-ing heads,suitable for general dividing,gera and rack spindle cutting, in many use. 2. Disigned for super hold 55.5mmof diameter, shaft hole, slope of end hole is Morse’s taper NO.6 AND bs-3 canbe adjusted from being level or vertical (0~90 degree) 3. Its tailstock designed indovetail joint, very strong in structure which is available for heavy-dutyload, also the degree can be adjusted in every direction 4. All the BS-3’s shaft, spindlecenter, worm and gear are made of super steels through grinding, heattreatment, to achieve rigid construction 5. The ratio of worm and worm gearis 1:40 6. The dividing plate is availablein two sides, A and B A Face 24,25,28,30,34,37,39,41,42,43 B Face 46,47,49,51,53,54,57,58,59,62,66 7. The changeable gears are24,28,32,38,40,44,48,56,64,72,86 and 100

Add to Wishlist

Compare

Oil Country Lathe Machine

Available on backorder

Main features: 1.Heavy machine bed made of premium cast-iron with hardened and ground guideways 2.Massiveheadstock with high-precision spindle running in tapered roller bearings, and 2lathe chuck mounts on both sides 3.Gears arehardened and ground 4.High torque atthe working spindle ensures high chip removal rates when machining parts withlarge diameters 5.Powerful maindrive motor with 7,5 kW power 6.Central,practical controls for feeds and thread leads 7.Wide spectrum ofinch and metric threads 8.Heavy-duty4-station tool holder 9.Coolant systemis included 10.Taper turningunit with 500 mm turning length

Add to Wishlist

Compare

Pipe threading lathe machine Q1322

Available on backorder

Main Features：

1. All parts processed in precision to ensure lathe work in good performance.

2. The ultrasonic frequency quenched guide-ways have good wear-resistance.

3. The gears have been quenched and ground by grinding machine.

4. The spindle adopts two-supporting structure and runs smoothly and precisely in high speed as all gears properly processed.

5. Headstock, feedbox and apron all made of high quality cast iron, which is casted with resin sand foundry technology.

6. The lathe is equipped with reliable safety devices such as braking system, emergency power-off switch and overload protection system.

Add to Wishlist

Compare

Pipe threading lathe machine Q1327

Available on backorder

Main Features：

1. All parts processed in precision to ensurelathe work in good performance.

2. The ultrasonic frequency quenched guide-wayshave good wear-resistance.

3. The gears have been quenched and ground bygrinding machine.

4. The spindle adopts two-supporting structureand runs smoothly and precisely in high speed as all gears properly processed.

5. Headstock, feedbox and apron all made ofhigh quality cast iron, which is casted with resin sand foundry technology.

6. The lathe is equipped with reliable safetydevices such as braking system, emergency power-off switch and overloadprotection system.

Add to Wishlist

Compare

Pipe threading lathe machine Q245

Available on backorder

Main Features：

1. All parts processed in precision to ensure lathe work in good performance.

2. The ultrasonic frequency quenched guide-ways have good wear-resistance.

3. The gears have been quenched and ground by grinding machine.

4. The spindle adopts two-supporting structureand runs smoothly and precisely in high speed as all gears properly processed.

5. Headstock, feedbox and apron all made ofhigh quality cast iron, which is casted with resin sand foundry technology.

6. The lathe is equipped with reliable safetydevices such as braking system, emergency power-off switch and overloadprotection system.

Add to Wishlist

Compare

Pipe threading lathe machine Q350

Available on backorder

Main Features：

1. All parts processed in precision to ensure lathe work in good performance.

2. The ultrasonic frequency quenched guide-ways have good wear-resistance.

3. The gears have been quenched and ground by grinding machine.

4. The spindle adopts two-supporting structure and runs smoothly and precisely in high speed as all gears properly processed.

5. Headstock, feedbox and apron all made of high quality cast iron, which is casted with resin sand foundry technology.

6. The lathe is equipped with reliable safety devices such as braking system, emergency power-off switch and overload protection system.

Add to Wishlist

Compare

Pipe threading lathe machine QK1327

Available on backorder

Features: 1.mainly used for processinginner and outer pipe thread (including metric thread and inch thread). 2.It can undertake variousturning works such as turning inner and outer cylindrical surface, conicalsurface and other revolution and end surfaceas general CNC lathes. 3.It used in various machineryprocessing, petroleum exploiting and delivering, mining, vehicle and ship parts 4.The spindle bore is very large and set up double chucks both front and ack and you can choose electric chucks as you like. 5.The surface of the slide railof the bed is treated by the super audio quench, which can be endurable andwear-resisting. The slide rail f saddle is treated by wear-resisting layercoated, to avoid the crawling. 6.There are two types of speedchange: Manual and step less. 7.Set up self lubricationsystem, and easy to maintain.

Add to Wishlist

Compare

Pipe threading lathe machine QK1319

Available on backorder

Features: 1.mainly used for processinginner andouter pipe thread (including metric thread and inch thread). 2.It can undertake variousturning workssuch as turning inner and outer cylindrical surface, conicalsurface and otherrevolution and end surfaceas general CNC lathes. 3.It used in various machineryprocessing,petroleum exploiting and delivering, mining, vehicle and ship parts 4.The spindle bore is very large and set up double chucks both front and ack and you canchoose electric chucks as you like. 5.The surface of the slide railof the bedis treated by the super audio quench, which can be endurable andwear-resisting.The slide rail f saddle is treated by wear-resisting layercoated, to avoid thecrawling. 6.There are two types of speedchange:Manual and step less. 7.Set up self lubricationsystem, and easyto maintain

Add to Wishlist

Compare

Pipe threading lathe machine QK1338

Available on backorder

Features: 1.mainly used for processing inner and outer pipe thread (including metric thread and inch thread). 2.It can undertake various turning works such as turning inner and outer cylindrical surface, conicalsurface and otherrevolution and end surfaceas general CNC lathes. 3.It used in various machineryprocessing,petroleum exploiting and delivering, mining, vehicle and ship parts 4.The spindle bore is very large and set up double chucks both front and ack and you canchoose electric chucks as you like. 5.The surface of the slide railof the bedis treated by the super audio quench, which can be endurable andwear-resisting.The slide rail f saddle is treated by wear-resisting layercoated, to avoid the crawling. 6.There are two types of speedchange:Manual and step less. 7.Set up selflubricationsystem, and easy to maintain.

Add to Wishlist