0
0 items
KSh0.00
No products in the cart.
Mini Rotary table HV-3/4/5
Available on backorder
Main features:
1. It is anadjustable height tailstock used when you need to support a long part held inthe rotary table- such ascutting a spline on a shaft.
2. Precisionmade of heavy cast iron, it has a basefor mounting tothe mill table with T- bolts.
3. Manufactured from Seasoned Grade Casting.
4. Adjustable toCenter Heights from 80 - 105mm
Add to Wishlist
Add to Wishlist
Rotary table HV-6,8,10,12,14,16
Available on backorder
Main features:
1. TSL vertical &horizontal rotary table is one of the main accessory of milling machine, it isused for index boring, milling, circle cutting, spot facing and boring hole etcon milling machine.
2. Rotary table in verticalwith tailstock working together, it can used on complex work for circle indexboring and milling.
3. As clients’ specialrequirements the TSL with left handwheel can be offered.
4. A flange for connecting scroll chuck is special supplied,and be packedindependent.For special order,the dividing plates accessory allows the operatorto accurately divide the 360 degree rotation of the clamping surface intodivisions of 2 through 66,and all divisible of 2,3 and 5 from 67-132.
5. Optional accessories: hole plate, flange, tailstock, center
Add to Wishlist
Add to Wishlist
Tilting rotary table TSK series
Available on backorder
Main features:
1. The TSK series tiiting rotarytables are one of main accessories for milling, boring and drilling machines.
2. They can be used for machining,the oblique hole or surface and hole of compund angle at one set-up.
3. It is so designed as to be usedin a vertical position to carry out center work with a tailstock.
4. This table can be tilted to anyposition from 0 to 90 and locked.
5. Aflange for connecting scrollchuck is special supplied, and be packed independent.
6. For special order, the dividnigplates accessory allows the operator to accurately divide the 360 rotation ofthe clamping surface into dividions of 2 through 66, and all divisible of 2,3and 5 from 67-132.
Add to Wishlist
Add to Wishlist
BT shell mill arbors
Available on backorder
Main features：
- High quality elastic steel material with long use time.
- Type: A AD AD/B
- Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
- Suitable Facing Cutter:13mm-50mm
- The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
- Holder hardness:48-55HRC
- Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Available on backorder
Main features:
1.Made from carburized alloy steel, work surface hardness to HRC58~62.
2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed
running to protect the spindle.
3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT End mill adapters
Available on backorder
Main features：
1.Made from carburized alloy steel, work surface hardness to HRC58~62.
2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed
running to protect the spindle.
3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Available on backorder
Main features：
1, The material: Allyed case hardened steel, black-finished and precisely grinded
2, The precision: 0.005mm
3, The hardness: 52-58HRC
4, Surface: black, sand-blasting
5, Taper tolerance: AT3
6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Available on backorder
Main features：
1.material:20CrMnTi
2.Comprehensive Accuracy:0.005mm
3.hardness:HRC56°-60°,carbon depth>0.8mm
4.Balanced G6.3/12000rpm,G2.5/20000rpm available
5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Available on backorder
Main features：
1.The material: Allyed case hardened steel, black-finished and precisely grinded
2.Taper tolerance: AT3 Standard
3.Hardness: 50-55HRC
4.Run out: 0.005mm
5.Coolant: AD, ADB, B type
6.Surface: blacken, sand blasting, plating
7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Available on backorder
Main features：
1. Material: 20CrMnTi
2. Accuracy: 0.005mm
3. Hardness: HRC48-52
4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools
5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Available on backorder
Main features：
1. Material: 20CrMnTi
2. Accuracy: 0.005mm
3. Hardness: HRC48-52
4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools
5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Available on backorder
Main features:
1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined
plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system.
3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting,
the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed,
starting and stopping the machine
Add to Wishlist
Add to Wishlist
Vertical milling machineXL5032,XL5036
Available on backorder
Main featurs:
1.Driven by servo motor.
2.Table automatic feed on X,Y,Z.
3.Automatic rapid feed X,Y,Z.
4.Extremely rigid cutter head swivels ± 30°
5.Large set up table features a hardened surface and is perfectly suited for clamping large workpieces.
6.Spindle head is ISO50.
7.High rigidity.capable of heavy load cutting.
8.Guide ways and gears are hardened and ground.
9.Manual quill feed for miro-feeds during milling and rilling,even with titled cutter head.
10.Standrd equipment includes digital 3-axis position indicator,large chip tray,and coolant system to ensure
long tool life and excellent workpiece surface quality.
11.Machine frame with extra rigid design,wide knee slide and large travel sizes.
Add to Wishlist
Add to Wishlist
Vertical milling machineXQ5032,XL5030
Available on backorder
Main features:
1.Driven by servo motor.
2.Table automaticfeed on X,Y,Z.
3.Automatic rapidfeed X,Y,Z.
4.Extremely rigidcutter head swivels ± 30°
5.Large set uptable features a hardened surface and is perfectly suited
for clamping large workpieces.
6.Spindle head isISO40.
7.High rigidity capable of heavy load cutting.
8.Guide ways and gears are hardened and ground.
9.Manual quill feed for miro-feeds during milling and rilling,even with titled cutter head.
10.Standrd equipment includes digital 3-axis position indicator,large chip tray,and coolant system to ensure long tool life and excellent workpiece surface quality.
11.Machine frame with extra rigid design,wide knee slide and large travel sizes
Add to Wishlist
Add to Wishlist
BY60100C,BY60125C
Available on backorder
Main Features
1. The machine is suitable for various cutting plane, formed surface and is suitable for single piece and small batch production.
2.The main cutting movement and feeding movement are driven by hydraulic transmission, with stepless speed adjustment.
3.This machine has hydraulic overload insurance device, with thesmooth transmission, small excess of stroke, reliable and flexible
starting andstopping.
4. This machine has a high rigidity, strong cutting force andhigh reversing precision, low oil temperature, small thermal deformation.
5. This machine has a stable accuracy and can adapt to thestrong cutting and continuous work.
6. The machine table can realize the fast moving in vertical andhorizontal directions, and the tool post has the automatic tool-reliefmechanism.
The handles of the machine is centralized, so it is convenient for operation.
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
