Filter
Sort:
Show:
BT shell mill arbors
Compare

BT shell mill arbors

Available on backorder
Main features：
  1. High quality elastic steel material with long use time.
  2. Type: A AD AD/B
  3. Shank of the BT Taper Shell Mill Arbors:BT30, BT40,BT50
  4. Suitable Facing Cutter:13mm-50mm
  5. The precision little than 0.01mm with balance 8000rpm. Higher precision also can be made by your demand.(G6.3/12000rpm, G2.5/20000rpm)
  6. Holder hardness:48-55HRC
  7. Suitable Pull Stub& Facing Cutter is also upon request.
Add to Wishlist
Add to Wishlist
BT drill chuck arbors
Compare

BT drill chuck arbors

Available on backorder
Main features: 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.  
Add to Wishlist
Add to Wishlist
BT End mill adapters
Compare

BT End mill adapters

Available on backorder
Main features： 1.Made from carburized alloy steel, work surface hardness to HRC58~62. 2.Taper accurary≤ AT3, ensure well contact with spindle cone for high speed running to protect the spindle. 3.Concentrictity and runout ≤0.005mm in high rpm.
Add to Wishlist
Add to Wishlist
BT morse taper with tang
Compare

BT morse taper with tang

Available on backorder
Main features：   1, The material: Allyed case hardened steel, black-finished and precisely grinded 2, The precision: 0.005mm 3, The hardness: 52-58HRC 4, Surface: black, sand-blasting 5, Taper tolerance: AT3 6, Dynamic balancing can be made G6.3/12000rpm, G2.5/25000rpm
Add to Wishlist
Add to Wishlist
BT milling chuck arbors
Compare

BT milling chuck arbors

Available on backorder
Main features： 1.material:20CrMnTi 2.Comprehensive Accuracy:0.005mm 3.hardness:HRC56°-60°,carbon depth>0.8mm 4.Balanced G6.3/12000rpm,G2.5/20000rpm available 5.high temperature resistance.
Add to Wishlist
Add to Wishlist
HSK ER collect chuck
Compare

HSK ER collect chuck

Available on backorder
Add to Wishlist
Add to Wishlist
HSK end mill holder
Compare

HSK end mill holder

Available on backorder
Main features： 1.The material: Allyed case hardened steel, black-finished and precisely grinded 2.Taper tolerance: AT3 Standard 3.Hardness: 50-55HRC 4.Run out: 0.005mm 5.Coolant: AD, ADB, B type 6.Surface: blacken, sand blasting, plating 7.Dynamic balancing : G2.5/25000rpm
Add to Wishlist
Add to Wishlist
HSK shell end mill holder
Compare

HSK shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
HSK combi-shell end mill holder
Compare

HSK combi-shell end mill holder

Available on backorder
Main features： 1. Material: 20CrMnTi 2. Accuracy: 0.005mm 3. Hardness: HRC48-52 4.7:24 taper precision ≤AT3And part of the standard size are tested by standard inspection tools 5.Dynamic balance: we can do G2.5:15000rpm/20000rpm/25000rpm according to clients ‘demands
Add to Wishlist
Add to Wishlist
American-type Quick Change Tool Post and holders
Compare

American-type Quick Change Tool Post and holders

Available on backorder
Main features： 1.cam-lock handle rigiditylocks&quickly releases tool holder 2.Adjust tool to 40 positions 3.heat-treated and precision-ground 4.change tools in seconds 5.Correct height of cutting edage is easily & accurately asjusted by special set screws 6.reground tools withoutremoval from holder setting 6.40different angles（every 9 degree）are conveniently selected from position dials with marker
Add to Wishlist
Add to Wishlist
Europe quick change tool post
Compare

Europe quick change tool post

Available on backorder
Main features： 1.cam-lock handle rigiditylocks&quickly releases tool holder 2.Adjust tool to 40 positions 3.heat-treated and precision-ground 4.change tools in seconds 5.Correct height of cutting edage is easily & accurately asjusted by special set screws 6.reground tools withoutremoval from holder setting 6.40different angles（every 9 degree）are conveniently selected from position dials with marker
Add to Wishlist
Add to Wishlist
Italy quick change tool post
Compare

Italy quick change tool post

Available on backorder
Main features： 1.   The quick change tool post is amajor spare part of the ordinary lathes. 2.   It is composed of thecutter-cartridge body and the tool-holder for various cutting tools forprocessing works like cylindrical facing,end facing.cutting knurling,drilling,enlargingboring and reaming ect. 3.   The height of tools can beregulated and positioned relative to the centerline of machine spindle. 4.   It features externaltool-mounting,tool-matching,quick tool-changing,great presision in positioningand great hardness ect.
Add to Wishlist
Add to Wishlist
End Mill Cutter 327-2-2,327-2-25
Compare

End Mill Cutter 327-2-2,327-2-25

Available on backorder

Main Features:

1.      Full grinding 2.      Din 327 standards 3.      Helical angle 30 degree 4.      Shorter or longer are available 5.      Material HSS 6.     Coated with TI is available
Add to Wishlist
Add to Wishlist
End Mill Cutter 844-4-2,844-4-37
Compare

End Mill Cutter 844-4-2,844-4-37

1 in stock
Main Features: 1.      Full grinding 2.      Din 844 standards 3.      Helical angle 30 degree 4.      Shorter or longer are available 5.     Material HSS 6.     Coated with TI available
Add to Wishlist
Add to Wishlist
End Mill Cutter 2-Flute,4-Flute
Compare

End Mill Cutter 2-Flute,4-Flute

1 in stock
Main Features:  1.TiN-coated, 2 - 5 times longer service life 3.double cutting power 4.improved part surface 5.DIN 327 D, short length 6.Designed with 2 cutting edges. Face teethfor centric cuts. For cutting keyways/grooves (P 9 fitting) and center cut-out.Vertical or side cutting possible, with cyl. shaft and side drive dog acc. toDIN 1835 B, 3, 4, 5, 6, 8, 10, 12, 14, 18, 20 mm 7.DIN 844 B, short length 8.Designed with 4 cutting edges with 30°right-hand spiral for excellent chip removal. Facing teeth for centric cuts.For normal to hard materials with cyl. shaft and side drive dogs DIN 1835 B, 3,4, 5, 6, 8, 10, 12, 14, 18, 20 mm
Add to Wishlist
Add to Wishlist

Filter Products

Find the Right Machine Faster

Having the right Machine and accessories will help you to boost your work comfort and get profits that you have been planning.

Categories

Product Status