0
0 items
KSh0.00
No products in the cart.
Mini Rotary table HV-3/4/5
Available on backorder
Main features:
1. It is anadjustable height tailstock used when you need to support a long part held inthe rotary table- such ascutting a spline on a shaft.
2. Precisionmade of heavy cast iron, it has a basefor mounting tothe mill table with T- bolts.
3. Manufactured from Seasoned Grade Casting.
4. Adjustable toCenter Heights from 80 - 105mm
Add to Wishlist
Add to Wishlist
Rotary table HV-6,8,10,12,14,16
Available on backorder
Main features:
1. TSL vertical &horizontal rotary table is one of the main accessory of milling machine, it isused for index boring, milling, circle cutting, spot facing and boring hole etcon milling machine.
2. Rotary table in verticalwith tailstock working together, it can used on complex work for circle indexboring and milling.
3. As clients’ specialrequirements the TSL with left handwheel can be offered.
4. A flange for connecting scroll chuck is special supplied,and be packedindependent.For special order,the dividing plates accessory allows the operatorto accurately divide the 360 degree rotation of the clamping surface intodivisions of 2 through 66,and all divisible of 2,3 and 5 from 67-132.
5. Optional accessories: hole plate, flange, tailstock, center
Add to Wishlist
Add to Wishlist
Tilting rotary table TSK series
Available on backorder
Main features:
1. The TSK series tiiting rotarytables are one of main accessories for milling, boring and drilling machines.
2. They can be used for machining,the oblique hole or surface and hole of compund angle at one set-up.
3. It is so designed as to be usedin a vertical position to carry out center work with a tailstock.
4. This table can be tilted to anyposition from 0 to 90 and locked.
5. Aflange for connecting scrollchuck is special supplied, and be packed independent.
6. For special order, the dividnigplates accessory allows the operator to accurately divide the 360 rotation ofthe clamping surface into dividions of 2 through 66, and all divisible of 2,3and 5 from 67-132.
Add to Wishlist
Add to Wishlist
Cross slide table AKP series 201,202,203,204,205
Available on backorder
Main features：
1.Worktable surface material is made of cast #250.
2. leadscrew exposed and it’s idle stroke 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
Add to Wishlist
Add to Wishlist
Compound table AKB series AKB-1,AKB-2,AKB-3
Available on backorder
Main features：
1.Worktable surface material is made of cast #250.
2. leadscrew idle stroke 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5.model AKB-1only can rotate on X axis,
AKB-2 andAKB-3 can rotate on X and Y axis.
6.modelAKB-3 have handls,easy operation.
Add to Wishlist
Add to Wishlist
Cross slide table swivel base AKP-1 series 302,303,304,305
Available on backorder
Main feature:
1.Worktable surface material is made of cast #250.
2. With exposed leadscrew and it’s idle stroke 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5.rotate in Horizontal plane by 360 degree
Add to Wishlist
Add to Wishlist
Precision cross slide table AKP-2 series 204,205,206
Available on backorder
Main features：
1.Worktable surface material is made of cast #250.
2. leadscrew idle stroke 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5.High precision
Add to Wishlist
Add to Wishlist
Precision cross slide table BF series BF16,BF20
Available on backorder
Main features：
1.Worktable surface material is made of cast #250.
2. leadscrew idle stroke turning 0.1mm per 3 graduation.
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5.The swallow tail of work table is 60 degree.
6.leadscrew nut is made of Ductile Cast Iron.
Add to Wishlist
Add to Wishlist
Cross slide table TC18
Available on backorder
Features：
1.Worktable surface material is made of cast #250.
2. leadscrew idle stroke 0.05mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
Add to Wishlist
Add to Wishlist
CNC cross slide table with stepper motor 206-B
Available on backorder
Main Features：
1.Worktable surface material is made of cast #250.
2.Ball leadscrew idle stroke 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5.stepper motor
Add to Wishlist
Add to Wishlist
Cross slide table with power feed 206-Z
Available on backorder
Main Features：
1.Worktable surface material is made of cast #250.
2. Ball leadscrew idle strokeis 0.06mm
3.X,Y axis reticle tolerance is 0.05mm
4.surface parallelism is 0.03mm/100mm
5. stepless speed
Add to Wishlist
Add to Wishlist
shaping machine BC6085,BC60100
Available on backorder
Main features:
1. The worktable can about rotate angles, meanwhile, it isequipped with horizontal and lifting mechanism for planing inclined
plane which enlarge its using scope.
2. It is convenient to adjust feedings and change tool path by adopting cammechanism as feeding system.
3. The shaper has installed protections against overloading inside the toolpath system, due to careless operation or external influences and overload cutting,
the blade will slide automatically, non-destructive parts will work toensure the normal operation of the machine.
4. The RAM, rail bed, speeding gear and major sliding guide are all lubricatedby the oil pump.
5. The shaper has parking brake mechanism, therefore, it is unnecessary to cut off electric power when changing speed,
starting and stopping the machine
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440K
Available on backorder
Main features:
1. Induction hardened, precision ground V-way bed.
2. D1-4 spindleis supported by high quality tapered roller bearing.
3. Hardened,precision ground gears in headstock.
4. High precision directly mounting chuck.
5. Carriage mounted spindle control lever.
6. Automatic feed and threading are fully interlocked.
7. Tailstock maybe offset for turning tapers.
8. One-piece casting iron base allows heavy cuts.
9. Tolerance test certificate, test flow chart included.
Add to Wishlist
Add to Wishlist
Gap Bed Lathe Machine CQ6236
Available on backorder
Main features:
1.2 Axis digital readout system
2.Quick change toolpost with 5 holders
3.Concertina leadscrew cover
4.Gear drive headstock for quick change of spindle speeds
5.Precision V-beds are hardened and ground, incorporating a rigid webbed casting
6.Foot operated spindle brake with safety cut out switch
7.Change gears for metric and imperial thread cutting
8.Adjustable taper roller bearings support the spindle
9.Inching button is incorporated on the control panel for convenient spindle speed selection
10.Enclosed quick action gearbox for thread cutting and auto feeding
11.Powered longitudinal and cross feeds
12.D1-5 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
13.Removable gap bed-way for larger diameter jobs
Add to Wishlist
Add to Wishlist
Gap bed lathe machine GH1440A
Available on backorder
Main features:
1. Gear drive headstock for quick change of spindle speeds
2. Cast iron stand increasing rigidity and reducing vibration
3. Precision V-beds are hardened and ground, incorporating a rigid webbed casting
4. Low voltage work light
5. Foot operated spindle brake with safety cut out switch
6. Slide out front swarf tray for easy cleaning
7. Change gears for metric and imperial thread cutting
8. Oil sight glass for head stock and gearbox
9. Adjustable taper roller bearings support the spindle
10. Overload clutch mechanism on auto power feed
11. Micro-adjustable length-stop onbed-way for accurate repetitive operation
12. 3.2HP/415V motor 16-speed(50-2000rpm)
13. Inching button is incorporated on the control panel for convenient spindle speed selection
14. Enclosed quick action gearbox for thread cutting and auto feeding
15. Powered longitudinal and cross feeds
16. D1-4 camlock spindle for quick chuck changes and safe reverse-direction turning. ISO standard
17. Removable gap bed-way for larger diameter jobs
18. Dual calibrated dials (except for saddle hand-wheel)
19. Chuck & change gear guards are fitted with micro switches
20. Coolant system with flexible hose
21. Slide out swarf tray
Add to Wishlist
Add to Wishlist
Gap bed lathe machine CH series
Available on backorder
Main features:
1. Very rigid machine bed withheavy ribbing
2. Wide V-guide,induction-hardened and precision-ground
3. Maximum accuracy and quietoperation even at high speeds
4. High machining performance withheavy-duty powerful main drive
5. Infinitely variable slip clutchallows working with stops
6. Universal gearbox allowscutting of inch, metric threads, modular & diametral pitches
7. Accurate tested according toDIN 8606, best surface roughness of 1.6 um / N7 according to DIN 1302
8. Removable gap bridge formachining of large diameter parts
9. Large spindle Capacity diameter80 mm for machining of long parts
10. To ensure maximum accuracy andsmooth operation at high speeds
11. The main spindle is dynamicallybalanced and supported by adjustable precision bearing
12. Camlock ASA D1-8 mount accordto DIN 55029
13. Centre lubrication pump for CAMbox and box way
14. Includes Time-Saving FootBrakes
15. Pull-out Chip Tray
16. Headstock gears run in an oilbath
17. Micrometer Stop
18. Full length splash guard
19. Foot brake
20. Coolant system
21. Halogen work lamp
22. Jog button and emergency stop
Add to Wishlist
Add to Wishlist
UK Office
Prestige Industrial Services Uk Ltd, 38 Beacon Buildings Leighswood Road, Aldridge Walsall West Midlands, WS9 8AA United Kingdom
TEL: +441922277452
MOBILE: +441922277452
EMAIL: salesuk@pindustrial.co.uk
Kenya Office
12 Dar-Es-Salaam Road Opposite Enterprise Road Post Office Industrial Area P.O. Box 18681-00500-Nairobi Kenya
TEL: +254 020 7760074
MOBILE: +254 780 202 426
EMAIL: sales@pindustrial.co.ke
Policies & Key Information
Store Information
- Machinery Shop
- CNC Machines
- Milling Machine
- Drill Machine
- Grinding Machine
- Metal Sheet Machine
- Measuring Tools
- Auto-Maintenance Equipment
- Machine Tool Cabinet
- Gear Hobbing Machine
- Lathe Machine
- Machinery Accessories
- Adjustable angle Plate
- Boring heads
- CNC tool systems
- Quick Change Tool Post
- Cross Table
- Clamping Kit
- Center drill
- Digit Read Out
- Dividing Head
- Drill Chuck
- Edge finder
- Electric power feed
- End Mill Cutter
- face mill cutter
- H.V. Rotary work table
- Lathe chuck
- Liver Center
- Machine Vice
- Magnetic chuck
- Milling Chuck Sets
- Pipe Bending Machine
- Logistic and Warehouse Equipment
- Pipe Threader Machine
- Press Machine
- Sawing Machine
- Shaping Machine
- Slotting Machine
- Welding Machine
- Wood Working Machine
- Tools Shop
- Products Shop
- Technical Services
- Our Market
- Contacts
Copyright ©2025 Prestige Industrial Services Ltd. All rights reserved.
